Advertisement
Substrobe DS-51 Package 3944.54 includes 4086.61 Arm System with EV
Manual Controller.
Substrobe DS-160 Package 3944.91 includes 4086.61 Arm System and
1.5 hour Smart Charger with EV Manual Controller.
Substrobe DS-161 Package 3945.03 includes 4086.61 Arm System and
1.5 hour Smart Charger with EV Manual Controller.
Optional 9523.61 single or 9523.62 dual tray and handles are required
for the attachment of DS-series strobes. The optional 9571.3 - Page 22
features a 1" (2.5cm) ball for attachment to the top of the release handle.
This provides a mounting point for Ultralight, TLC, and other non-Ikelite
arm systems.
Please Read If Using an EV Manual Controller
The EV-Controller used with Ikelite DS
Substrobes has two user settings. One
setting is for strobe selection, the other
is for pre-flash "P" or non pre-flash "P."
Most cameras use a pre-flash. This
means the EV-Controller should be set
to the pre-flash "P" position when used
with this camera as a slave. If a manual
mode is used that does not emit a
pre-flash, set the EV-controller to the
non pre-flash "P" position.
Ikelite EV Manual Controller
23
Advertisement
