Page 1
READ AND SAVE THESE INSTRUCTIONS Model Numbers: CF713WW00 CF713BS00 CF713ORB00 19.0 Net Weight: Lbs. PRO Series Energy Star Ceiling Fan Owner's Manual Part No. F40BP74200002 Form No. BP7420-2 ETL Model No.: CF713...
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan.
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Company. Substitution of parts or accessories not designated for use with this product by Emerson Electric Company could result in personal injury or property damage.
Page 4
Installing The Hanger IMPORTANT Ball/Downrod Assembly Your ceiling fan is designed to be installed either in the standard manner, or in the (For Standard Mounting) close-to-the-ceiling manner. Using the standard method, the hanger ball/downrod 1. Pass the 42" motor leads through the opening in assembly will suspend the fan several inches the ceiling cover.
Installing The Ceiling Cover WARNING On The Fan Motor Housing The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. (For Close-to-the-Ceiling Mounting) outlet box listed as “Acceptable for Fan Support”. 1.
Electrical Requirements Hanging The Ceiling Fan (Standard Method Using Your new ceiling fan will require a grounded electrical Hanger Ball/Downrod) supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and 1. Carefully lift the fan assembly and seat the hanger capable of withstanding a load of at least 50 pounds.
2. Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector REINSTALL SCREW AND TIGHTEN SCREW LOCKWASHER supplied (Figure 10). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 10).
Page 8
2. Mount one blade assembly to the motor hub by 5. Attach the switch housing cover with light fitter to mating the alignment post (Figure 12) of the flange the switch housing using the three previously with one of the alignment slots in the motor hub removed screws.
Emerson Electric Company. Substitution of parts or accessories not designated for use with this product by Emerson Electric Company could result in personal injury or property damage.
WARNING: Make sure main power is turned off. illuminate. 1. The 1.25 amp lamp fuse may have blown and 1. Replace the 1.25 amp fuse with Emerson repair part and needs replacement. item 20. See page 8 and reverse the switch housing installation instructions to gain access to the fuse holder.
Page 11
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.
Page 12
• PART DESCRIPTION • NAME OF ITEM • MODEL NUMBER For repair parts, phone 1-800-654-3545. Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Form No. BP7420-2 Part No. F40BP74200002 Printed in China 06/10...