DynaMO experience. You are responsible for the installation, management and operation of these applications. Fujitsu Computer Products of America makes no representations or warranties for the software included on the CD. All warranties, representations or support are provided by third parties and are described in the end user license agreement(s) included on the CD.
Connecting your DynaMO Hardware Connect USB cable to either port on your DynaMO drive. AC adapter Connect P O W E R O N S W I T C H A C A D A P T E R on the DynaMO drive Power P O W E R O N P O W E R O N...
Initialize the disk. Double click on “Disk Drive Tune Up SE” icon. Ensure that the USB bus is selected. Select the Fujitsu drive from the numerical list of USB devices. Select partition options, if desired, or use default options and click “install”.
Using your MO Disks E J E C T B U T T O N / B U S Y I N D I C A T O R E M E R G E N C Y E J E C T Inserting an MO Disk Gently insert the MO disk with the label side up, as shown above, until the disk clicks into place.
R I T E E N A B L E W R I T E P R O T E C T Write protection Your MO disk has Write Protect capability. Enabling the write protection on the MO disk prevents data from being lost or altered accidentally.
D I P S W I T C H S E T T I N G S SCSI ID SETTING For Windows® 2000, you must set the SCSI ID setting to zero. DIP Switch Settings The DIP switch settings on your DynaMO are the recommended settings for the USB configuration.
Q & A Can I create multiple partitions on an MO disk? No. Windows 98 will allow only one partition on an MO disk. Yes. Disk Drive Tune Up SE allows up to 15 partitions on a single disk. See the electronic Disk Drive Tune Up SE manual for details. Can I use my DynaMO SF+USB with Windows 95 OSR2.1? While the DynaMO drive may function using Windows 95 OSR2.1, you may encounter problems and not achieve optimum...