Advertisement
Table of Contents
FANTEC MR-SA1042 SAS Quartet Mobile Rack
Features of product ---
Aluminum Frame
Interface: Support SAS, SATA-I, SATA-II
Form Factor: 1 x 5.25" Bay for 4 x 2.5" SAS & SATA Hard Disk Driver
High performance transfer rate up to SAS 3Gb/s、SATA 1.5Gb/s、SATA 3Gb/s
Support RAID 0,1,5 Functions (Need an optional SAS or SATA Raid Control Card)
Plug & play, hot swappable
Point to point, free from master/slave setting
With 4Pin Power and 7PIN Signal connectors
Cooling fan: Built-in 2 X 4cm(4020) FAN
2 LED for Power & HDD access
Color for choice: black or beige
Dim: 185(L) X 146(W) X 42(H) mm
Weight : 0.7KG
--Inner tray with heat dissipation holes--
There are four screw holes at the bottom of each tray, use the screws(provided) to hold the HDD on the tray. (See
Picture A)
User's Manual
Model : MR-SA1042
Picture A
Advertisement
Table of Contents
Related Manuals for Fantec MR-SA1042
Summary of Contents for Fantec MR-SA1042
- Page 1 FANTEC MR-SA1042 SAS Quartet Mobile Rack Features of product --- Aluminum Frame Interface: Support SAS, SATA-I, SATA-II Form Factor: 1 x 5.25” Bay for 4 x 2.5” SAS & SATA Hard Disk Driver High performance transfer rate up to SAS 3Gb/s、SATA 1.5Gb/s、SATA 3Gb/s Support RAID 0,1,5 Functions (Need an optional SAS or SATA Raid Control Card) Plug &...
- Page 2 ---Safety Lock--- a) LOCK Turn the key clockwise to horizontal way --- It is locked and do NOT try to press the push-button to take out the HDD. b) UNLOCK Turn the key Counter-clockwise vertically --- It is open and you are permitted to press the push - button to take out the HDD.
Need help?
Do you have a question about the MR-SA1042 and is the answer not in the manual?
Questions and answers