Advertisement
Quick Links
MOD300 - Quick Start Guide
The MOD300 converts a HDMI output from a DVR (or other equipment such as a Satellite box) into a
digital RF signal or "Digital TV channel". It can then be viewed on a DVB-T equipped TV.
Note: The MOD300 has to process and digitise the HDMI input and this creates a delay or "latency" in its
output, this is typically in the region of 1 second.
1) Remove all the power to the modulator when connecting or removing cables.
2) Connect a HDMI cable from the DVR / NVR (or other video equipment) to the HD IN of the MOD300.
3) When combining the RF signal of a TV aerial and the MOD300, connect the TV aerial coax (f-
connector) to the RF.IN port. If using a masthead amplifier, see the full manual.
4) Connect a coax (f-connector) to the RF.OUT port direct to a TVs aerial socket or to a distributor to
multiple TVs.
5) Connect the 12V DC power supply to the MOD300, then re-tune the TVs.
Quick Start Guide - qMOD300
1
Digital HD Modulator
ScatterBox is a registered trademark of System Q Ltd
www.systemq.com/PDF
/manual/xMOD300.pdf
Copyright 2021 System Q Ltd
Advertisement
Related Manuals for ScatterBox MOD300
Summary of Contents for ScatterBox MOD300
- Page 1 1) Remove all the power to the modulator when connecting or removing cables. 2) Connect a HDMI cable from the DVR / NVR (or other video equipment) to the HD IN of the MOD300. 3) When combining the RF signal of a TV aerial and the MOD300, connect the TV aerial coax (f- connector) to the RF.IN port.
- Page 2 · Exit = Return to the previous menu / cancel selection The MOD300 has been designed for use in the UK, as standard the channel appears as "SBox" and channel 800 on the TV. Settings will need to adjusted if using multiple MOD300s or if the default channel is already in use or to change the channel name.