Advertisement
Quick Links
Advertisement
Summary of Contents for Wāvtech Steg SDSP6
- Page 1 SDSP6 SDSP8 USER'S GUIDE Car Audio DSP Power Amplifiers...
- Page 2 This symbol means important instructions. WARNING Failure to heed them can result in serious injury or death. This symbol means important instructions. CAUTION Failure to heed them can result in injury or property damages. WARNING • DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be performed while driving.
-
Page 3: Specifications
INTRODUCTION Thanks and congratulations for choosing STEG for your audio amplification and digital signal processing needs. These amplifiers have been significantly improved throughout the years in order to assure quality and reliability. The latest technology has been incorporated into every product, providing you with incredible power and unparalleled sound quality. - Page 4 WIRING, CONNECTIONS & SETTINGS It is important to read this manual thoroughly before starting your installation and always plan accordingly. Before installing, disconnect the negative (ground) wire from the vehicle’s battery to avoid damage to the vehicle or yourself. Following all guidelines will help provide years of enjoyment with your S amplifier.
- Page 5 SDSP6 ’ ‘ ” “ • Ž Œ <2ft <18in (45cm) (60cm) 8AWG External (min) Fuse: 30A Chassis Ground High Level/AUX/Coax Input and Pre-out Harness: White FL INPUT White/Black Gray/Black FR INPUT Gray Green RL INPUT Green/Black Purple RR INPUT Purple/Black...
- Page 6 SDSP8 ’ ‘ • “ ” Œ Ž <2ft <18in (45cm) (60cm) 8AWG External (min) Fuse: 50A Chassis Ground High Level/AUX/Coax Input and Pre-out Harness: White FL INPUT White/Black Gray/Black FR INPUT Gray Green RL INPUT Green/Black Purple RR INPUT Purple/Black...
- Page 7 DSP Features & Specifications SDSP6 SDSP8 DSP Resolution 32-Bit Sampling Rate 48kHz Signal Converters A/D and D/A Burr-Brown Input Source Select via PC or DRC Main (High Level), AUX, BT, Optical, Coax Main (High Level) 2ch, 4ch, 6ch, Mix (Mono, 2-way or 3-way sum) Input Channel Setting AUX, BT, Optical, Coax Null, FL, FR, RL, RR, SUB L, SUB R...
-
Page 8: Software Installation
SOFTWARE INSTALLATION 1.Install the PC software file “STEG DSP SETUP v1.0.1_EN-.exe” from the included USB flash drive. 2.Launch the program from the desktop icon and select “Offline-Mode” from the opening window. 3.Power on the source and main DSP unit. For additional speaker protection, turn the source unit volume all the way down until initial crossover and channel configuration settings are made. - Page 9 Speaker Configuration & Channel Selection Image: This section with speaker images and vehicle positions represents the settings made in its pull-down menu that provides pre-set speaker configurations as well as any manual changes made to speaker output type made in section ④. The currently selected output channel in section ④...
- Page 10 SDSP6 SYSTEM EXAMPLE: 4-IN/8-OUT REM IN CH1/2 CH3/4 FL/FR IN RL/RR IN CH7/8 CH5/6 Note: In this system example, all 6-channels of the SDSP6’s powered outputs are used for front 2-way components and rear full-range speakers. For adding a subwoofer amplifier, the CH5/6 preouts may be used.
- Page 11 Warranty & Service Care GT Trading warrants this product to be free from manufacturing defects for a period of one (1) year from original date of purchase. Under this warranty, Wāvtech will replace the defective product on behalf of GT Trading with a new or remanufactured one at no charge.
- Page 12 GT Trading reserves the right to make modifications or improvements without notice thereof. The availability of the products illustrated is subject to change. The described in this User's Guide represent just a part of the STEG products available. All brands and trademarks mentioned have been used exclusively for description purposes and all rights belong to the respective owners, total or partial.