Page 1
8-CHANNEL DIGITAL SIGNAL PROCESSOR SDSP68 USER'S GUIDE Car Audio DSP...
Page 2
This symbol means important instructions. WARNING Failure to heed them can result in serious injury or death. This symbol means important instructions. CAUTION Failure to heed them can result in injury or property damages. WARNING • DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be performed while driving.
INTRODUCTION Thanks and congratulations for choosing STEG for your digital signal processing needs. These processors have been significantly improved throughout the years in order to assure quality and reliability. The latest technology has been incorporated into every product, providing you with unparalleled sound quality. Our highly developed circuitry contributes to low distortion and the ultimate in tuning flexibility.
WIRING & CONNECTIONS It is important to read this manual thoroughly before starting your installation and always plan accordingly. Before installing, disconnect the negative (ground) wire from the vehicle’s battery to avoid damage to the vehicle or yourself. Following all guidelines will help provide years of enjoyment with your S TEG DSP Œ...
SDSP68 Œ Ž +12V <18in (45cm) <2ft (60cm) External Fuse: 2A REM IN REM OUT ‘ ’ ” SDSP68 “ • Power Supply Harness: REM IN REM OUT Blue +12V Yellow Black High Level Input Harness: Black White FL INPUT White/Black...
SOFTWARE INSTALLATION 1.Install the SDSP68 PC software from the included USB flash drive. 2.Launch the program from the desktop icon and select “Offline-Mode” from the opening window. 3.Power on the source and main DSP unit. For additional speaker protection, turn the source unit volume all the way down until initial crossover and channel configuration settings are made.
Page 9
Preset Save/Load: Up to 8 presets can be saved (Write To Device) to the POS1-POS8 buttons, where they can be loaded from memory later (Read From Device) to override the current DSP and PC software settings. Note that master and sub volume settings are not saved to presets and will be overridden if adjustments are made from the optional DRC remote or if any changes are made from the tuning software after loading a preset.
SYSTEM EXAMPLE-1: CH1/2/3/4 OUT +12V REM IN CH5/6 FL/FR IN RL/RR IN CH7/8 Note: In this system example, all 8-channels of the SDSP68 outputs are used for bi-amped front 2-way components, rear coaxials and a subwoofer. The signal feeding CH1/2 and CH3/4 outputs is derived from the front channels and then crossed over for the 2-way components, while CH7/8 is derived as a sum of the front and rear input signals from the 4-channel source as shown.
Page 11
Warranty & Service Care GT Trading warrants this product to be free from manufacturing defects for a period of one (1) year from original date of purchase. Under this warranty, Wāvtech will replace the defective product on behalf of GT Trading with a new or remanufactured one at no charge.
Page 12
GT Trading reserves the right to make modifications or improvements without notice thereof. The availability of the products illustrated is subject to change. The described in this User's Guide represent just a part of the STEG products available. All brands and trademarks mentioned have been used exclusively for description purposes and all rights belong to the respective owners, total or partial.