Left; Connecting Usb Devices - Lenovo ideapad D330 User Manual

Left

1. Combo audio jack

Connecting USB devices

You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your
computer.
The first time you plug a USB device into a particular USB port on your computer, Windows automatically
installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the
device without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs the driver
automatically. However, some devices may require you to install the driver before connecting. Check the
documentation provided by the device's manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring data to that
device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to
remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it.
Otherwise, the device may not be recognized.
2
User Guide
Connects to headsets.
Notes:
• The combo audio jack does not support conventional
microphones.
• The recording function may not be supported if third-party
headphones or headsets are connected, due to different industry
standards.