Download
Share
Print this page
Auper Eclipse 784 B Quick User Manual
  1. Manuals
  2. Brands
  3. Auper Manuals
  4. Control Systems
  5. Eclipse 784 B
  6. Quick user manual

Auper Eclipse 784 B Quick User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Auper Electronic Controls Inc
Eclipse 784 B
Quick User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Eclipse 784 B and is the answer not in the manual?

Questions and answers

Summary of Contents for Auper Eclipse 784 B

  • Page 1 Auper Electronic Controls Inc Eclipse 784 B Quick User Guide...
  • Page 2 Eclipse 784B Quick User guide 2010 Auper Electronic Controls Inc Edition E784BE 1.2...

  • Page 3: Installation

    6. Connect the power supply cord to the 20 VA, 12 volts AC transformer. We recommend using a battery backup with surge protector if you are in an area where power failures are frequent. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...

  • Page 4: Serial Connection

    (P/N: 70-030). RS-232 Null modem pin-out: Null modem with loop back handshaking The RS-232 cable cannot exceed 100 ft (30 meters). Set the RS-232 port to PC. (See programming) RS-232 null modem cable 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 5 When using the RS-422 port, you will need to convert the signal back to RS-232 before you can connect your cable to a computer, POS or printer. The AP421 converter will accommodate up to four RS-422 inputs to convert to a single RS-232 port. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 6 This often leads to the breather tube being pulled out when you try to remove it from the bottle. Trim the top wing using a nail clipper or a cutter. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 7 2. Shrink seal Slide the heat shrinkable seal over the pourer, hold in place and apply heat evenly to shrink the seal to the bottle using a heat gun. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 8 POS DISABLED. The next modes only apply when the interface feature is set to enable. Go directly to the serial port setting section. Press SP to set the POS interface to Enabled/Disabled. Press M to skip. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 9 PLU R PLU L PLU SP 0101 0111 0121 0131 0102 0112 0122 0132 0103 0113 0123 0133 0104 0114 0124 0134 0105 0115 0125 0135 0106 0116 0126 0136 0107 0117 0137 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 10 If you are interfacing one or more Eclipse systems using the RS-422 port, set to RS-422. If you are not interfacing your system to a POS, Press M to skip. MODE 8: PRINTER COM PORT SELECTION 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 11 MODE 13: DEFAULT POUR SIZE This is an option to return to a specific pour size. The delay to return to a specific pour size after removing the pourer from the ring can be set 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 12 Press M to exit this mode MODE 17: QUICK POUR MODE When the Quick pour mode is disabled, the system will complete the current pour size before you can shake the ring to start a new one. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...
  • Page 13 MODE 22: SAVE SETTINGS Your settings will be transferred into an independent memory chip. Should you need to re-initialize your systems microprocessor or clear the memory, you will be able to reload your system settings. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...

  • Page 14: Run Mode

    Apply your i-button key to the probe to exit. Press M to go to start again from the top RUN MODE Use this mode to pour drinks Select the pour size using the S, R, L and SP buttons. 2010 Auper Electronic Controls Inc Edition E784BE 1.2...

  • Page 15: Printing Reports

    After the report is printed, the system will ask you if you want to clear the counters. If no, press M to skip. If yes, apply a manager i-button key to the probe 2010 Auper Electronic Controls Inc Edition E784BE 1.2...