1. Manuals
  2. Brands
  3. MQ Multiquip Manuals
  4. Lighting Equipment
  5. GB43SC
  6. Operation and parts manual

MQ Multiquip GB43SC Operation And Parts Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
GloBug 4-Spot
MODEL GB43SC
LIGHTING SYSTEM
(FOR USE WITH MQ SERIES GENERATORS)
Revision #5 (10/09/19)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GB43SC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MQ Multiquip GB43SC

Summary of Contents for MQ Multiquip GB43SC

  • Page 1 OPERATION AND PARTS MANUAL GloBug 4-Spot MODEL GB43SC LIGHTING SYSTEM (FOR USE WITH MQ SERIES GENERATORS) Revision #5 (10/09/19) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

  • Page 2: Proposition 65 Warning

    PROPOSITION 65 WARNING PAGE 2 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 3 NOTES GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 3...

  • Page 4: Table Of Contents

    Wiring Diagram ............26 Specifications and part numbers are subject to change Explanation of Code in Remarks Column....28 without notice. Suggested Spare Parts ......... 29 PAGE 4 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 5 NOTES GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 5...

  • Page 6: Safety Information

    COULD result in DEATH or SERIOUS INJURY. CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 6 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 7 This information will be invaluable in the case of an „ DO NOT use the equipment for any purpose other than emergency. its intended purposes or applications. GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 7...
  • Page 8 „ ALWAYS have a trained technician to install and out of the reach of children and unauthorized personnel. remove lamp or replace any damaged fi xture wiring. PAGE 8 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 9 „ Make sure the mast is completely lowered before lifting shock, electrocution and the lighting system. even death. „ Use adequate lifting cable (wire or rope) of suffi cient strength. GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 9...
  • Page 10 „ ALWAYS remove lamp assembly from the mast when transporting lighting system. This will prevent damage to the bulb due to vibration. PAGE 10 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)

  • Page 11: Specifications

    364 lbs. (165 kg) Lamp Lamp Type Four 400-Watt Metal Halide Lumens 136,000 Mast Number of Stages Maximum Height 13.8 ft. (4.2 meters) Generator See Specified Generator Manual GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 11...

  • Page 12: Dimensions

    Length (Front to Rear Wheel) 3.41 (1,040) Standard Balloon Diameter 1.18 (360) Length (Front Wheel to 5.09 (1,550) Outrigger) Max. Height (Mast Deployed) 13.78 (4,200) PAGE 12 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)

  • Page 13: General Information

    „ Secure lock-type foot brake. „ Tire bumper for protection. „ Easy to disassemble and service parts. „ Safety winch prevents reverse winding. GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 13...

  • Page 14: Components

    COMPONENTS Figure 2. Major Components PAGE 14 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 15 13. Counterweight Lever — Holds the outriggers in place when deployed. 14. Locking Clamps — To secure the generator to the GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 15...

  • Page 16: Setup

    For additional safety, use chock blocks to prevent rolling. STEP DOWN ON BRAKE PEDAL LAMP SOCKET Figure 6. Installing the Lamp PARKING BRAKE SET Figure 4. Parking Brake (Set Position) PAGE 16 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 17 Figure 8. Securing Latch Figure 10. Locking Lamp Stand CAUTION When operating the fold lever, keep hands and fingers clear of the pinch points to prevent injury. GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 17...
  • Page 18 The possibility exists of electrocution, even death, if the GloBug comes in contact with high voltage power lines. Figure 13. Adjusting Angle of Light PAGE 18 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)

  • Page 19: Operation

    DO NOT shut down generator engine with the lamp TYPICAL switch on. This could cause damage or break the GENERATOR generator. GLOBUG 4-SPOT FRONT PANEL POWER CABLE 120V Figure 16. 120 VAC Receptacle GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 19...

  • Page 20: Storage

    3. Holding the lighting unit with one hand, pull up the fold lever with the other hand (Figure 18). PUSH DOWN FOLD LEVER LOCK LEVER Figure 18. Fold Lever Figure 20. Locking Lamp Stand PAGE 20 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 21 8. Press down on the top of the brake pedal (Figure 22) and hold, then release. This action will disengage the brake mechanism and allow the GloBug to be moved. Figure 23. Parking Brake (Released Position) GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 21...

  • Page 22: Maintenance

    MAINTENANCE PAGE 22 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 23 Generator output not 125 VAC? Adjust or replace generator. v - Daily Check n - Every 20 Hours l - Every 100 hours s - Every 500 hours GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 23...

  • Page 24: Troubleshooting

    Lamp only lights for a short time. Is ambient temperature too high Move lamp where there is proper (more than 104 °F (40 °C)? ventilation. PAGE 24 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 25 (Repair). lowered. Winch up mast a little and lower mast by Is safety stopper not working correctly? putting a load on it (Repair). GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 25...

  • Page 26: Wiring Diagram

    A400081900 CABLE (JUMPER-WHITE) CP A300069900 CABLE (JOINT-43SC-USA) CP A300069501 CABLE (LAMP-43SC-USA) CP A300069601 CABLE (BALLAST-43SC-USA) CP A300069700 CABLE (LAMP-43SC-USA) CP REF. PART NUMBER DESCRIPTION DESC PAGE 26 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 27 NOTES GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 27...

  • Page 28: Explanation Of Code In Remarks Column

    “Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. PAGE 28 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)

  • Page 29: Suggested Spare Parts

    1....A300069800 ..BALLAST ASSY 1....E000032000 ..CAPACITOR 1....1311100161 ..MIRROR/LENS NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 29...

  • Page 30: Nameplate And Decals

    These surfaces are extremely hot! ALWAYS allow sufficient time for both surfaces DCL414 cool down before touching. DCL415 DANGER HIGH VOLTAGE DCL418 BALLAST PAGE 30 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 31 DECAL; DANGER, HIGH VOLTAGE 35137 DECAL; WARNING, READ MANUAL NAMEPLATE ............1....CONTACT MQ PARTS DEPT. DCL415 DECAL; BURN HAZARD (BALLAST) DCL410 DECAL; DANGER, ELECTRICAL SHOCK (CORDS) 1 GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 31...

  • Page 32: Base Plate Assembly

    BASE PLATE ASSY. PAGE 32 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 33 STOPPER ............4....REPLACES P/N A400041100 0010512025 BOLT AND WASHER (M12 X 25) 0043112000 WASHER (M12) 0033112000 NUT (M12) E000032100 FREE BRUSH 0013106010 BOLT (M6 X 10) GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 33...

  • Page 34: Electrical Assembly - Round Lamp

    ELECTRICAL ASSY. — ROUND LAMP ( S/N G5000086 AND BELOW PAGE 34 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 35 CABLE (LAMP) CP ..........1....REPLACES P/N A300069500 A300069601 CABLE (BALLAST) CP ........1....REPLACES P/N A300069600 A300069700 CABLE (MAIN) CP A300069900 CABLE (JOINT) CP E000012300 BOLT SET, CHR-50 GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 35...

  • Page 36: Electrical Assembly - Oval Lamp

    ELECTRICAL ASSY. — OVAL LAMP ( S/N G5000087 AND ABOVE PAGE 36 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 37 WASHER (M16) 1042000230 SPRING 1502180110 WASHER A300069502 CABLE (LAMP) CP 1407021030 RECEPTACLE HOUSING A300069602 CABLE (BALLAST) CP A300069700 CABLE (MAIN) CP A300069900 CABLE (JOINT) CP GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 37...

  • Page 38: Ballast Assembly

    BALLAST ASSY. PAGE 38 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 39 HOLDER (CAPACITOR) E000032000 CAPACITOR E000031800 CLAMP 0043105000 WASHER (M5) 0033104000 NUT (M4) E000031600 TERMINAL A400081900 CABLE (JUMPER-W) A400082000 CABLE (JUMPER-B) 0023104020 SCREW (M4 X 20) GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 39...

  • Page 40: Main Mast Assembly

    MAIN MAST ASSY. SERIAL NOS. G5000029 AND ABOVE PAGE 40 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 41 BOLT (SUPPORT) (MK-440) ......1....S/N G5000028 AND BELOW 0013112040 BOLT (M12 x 40) 0033112000 NUT (M12) 1052001710 HANGER 0043212000 SPRING WASHER (M12) 0043112000 WASHER (M12) 1711080130 SHACKLE GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 41...

  • Page 42: T-Handle Assembly

    T-HANDLE ASSY. PAGE 42 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 43 1503300130 SLEEVE BEARING (30Dx34Dx20) A100018906 BASE PLATE ............1....REPLACES P/N A100018903 A300087403 SIDE GUARD .............2....S/N G5000029 AND ABOVE 0013508015 BOLT AND WASHER .........4....S/N G5000029 AND ABOVE GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 43...

  • Page 44: Steering Assembly

    STEERING ASSY. 21 22 PAGE 44 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 45 BRAKE SHAFT 2001200313 BRAKE PEDAL 0033108000 NUT (M8) 1041000131 SPRING (BRAKE) 0010308030 BOLT (M8x30) SUS A400055501 LINK (FRONT SHAFT) A400055401 LINK (STEERING) 0030808000 PUSH NUT (8) GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 45...

  • Page 46: Outrigger Assembly

    OUTRIGGER ASSY. PAGE 46 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 47 0043116000 WASHER (M16) 0043216000 SPRING WASHER (M16) 0033116000 NUT (M16) 2031321113 WEIGHT (OUT, R) R A100011501 BRACKET (OUT, R) L 2031320213 WEIGHT (OUT, R) L GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 47...

  • Page 48: Mast Adapter Assembly

    MAST ADAPTER ASSY. PAGE 48 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 49 SPRING (LAMP STAND) L 1043001330 SPRING (LAMP STAND) R 0010308030 BOLT (M8 X 30) 0033108000 NUT (M8) 2072310113 ADJUST LEVER (LAMP STAND) 1603000130 CLAMP 2072400510 CONNECTOR COVER GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 49...

  • Page 50: Mast Section Assembly

    MAST SECTION ASSY. PAGE 50 — GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19)
  • Page 51 A200027200 SECOND MAST 2002262010 BRACKET (PULLEY) ........1....MAST SECTION 2 A200027301 THIRD MAST ............1....REPLACES P/N A200027300 0023204006 SCREW (M4x6) 0023204010 SCREW (M4x10) 1031040113 WIRE ROPE (4Dx4800L) GB43SC GLOBUG 4-SPOT • OPERATION AND PARTS MANUAL — REV. #5 (10/09/19) — PAGE 51...
  • Page 52 OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Inc. (310) 537- 3700 6141 Katella Avenue Suite 200 Cypress, CA 90630 E-MAIL: mq@multiquip.com WEBSITE: www.multiquip.com UNITED KINGDOM CANADA Multiquip Multiquip (UK) Limited Head Offi...

Table of Contents