LW538-Instructions.qxp_Layout 1 31/01/2018 15:40 Page 1
Please Note: The pop-up tent shown, is for illustration purposes only and does not match the pop-up toilet tent in appearance.
However the function is identical to the product shown.
Fitting Guide - Tent set-up.
Step 1. To begin, remove the tent from
the bag.
Step 4. Holding onto the edge of the
left hand side, pull out
opening to the right.
Fitting Guide - Collapsing the Tent.
Step 1. Holding onto the right side,
fold into the left corner.
Pop Up
Step 2. Holding onto the top side firmly,
slowly lift up and the tent will
naturally unfold & spring up.
Step 5. The tent will then be fully open.
Secure using the tent pegs
provided.
Step 2. Repeat previous step for the left
side, folding the tent flat.
Toilet Tent
Step 3. Holding onto the edge of the
right hand side, pull out
opening to the left.
Step 3. Standing on the bottom of the
tent, lay the top edge on the
floor away from you.
Need help?
Do you have a question about the LW538 and is the answer not in the manual?
Questions and answers