Download Print this page
National Tree Company Pre-Lit Entrance Tree Assembly Instructions

National Tree Company Pre-Lit Entrance Tree Assembly Instructions

Advertisement

Quick Links

SAVE THESE INSTRUCTIONS
2 Commerce Drive, Cranford, New Jersey 07016 USA
www.nationaltree.com
Pre-Lit Entrance Tree
Assembly Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW
ALL SAFETY INSTRUCTIONS
• Do not use seasonal products outdoors
unless marked suitable for indoor and
outdoor use. When products are used
in outdoor applications, connect the
product to a Ground Fault Circuit
Interrupter (GFCI) outlet. If one is not
provided, contact a qualified electrician
for proper installation.
• This seasonal use product is not
intended for permanent installation
or use.
• When decorating trees, use miniature
light bulb strings or LED light strings
only. "C" size bulbs are not
recommended.
• Do not mount or place near gas or
electric heaters, fireplaces, candles or
other similar sources of heat.
• Do not secure the wiring of the product
with staples or nails, or place on sharp
hooks or nails.
• Unplug the product when leaving the
house, when retiring for the night, or if
left unattended.
• CAUTION: This is an electrical product
– not a toy! To avoid risk of fire, burns,
personal injury and electric shock, it
should not be played with or placed
2-12
CAUTION
where small children can reach it.
• Do not let lamps rest on the supply
cord or any wire.
• Do not use this product for other than
its intended use.
• Do not hang ornaments or other objects
from cord, wire or light string.
• Do not close doors or windows on the
product or extension cords as this may
damage the wire insulation.
• Never operate this product if the power
cord or plug is damaged.
• Use only manufacturer specified
replacement bulbs.
• Read and follow all instructions that are
on the product or provided with the
product.
USE AND CARE INSTRUCTIONS
• When storing the product, carefully
remove the product from wherever it is
placed, including trees, branches, or
bushes, to avoid any undue strain or
stress on the product conductors,
connections, and wires.
• When not in use, store neatly in a cool,
dry location protected from sunlight.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pre-Lit Entrance Tree and is the answer not in the manual?

Questions and answers

Summary of Contents for National Tree Company Pre-Lit Entrance Tree

  • Page 1 Pre-Lit Entrance Tree Assembly Instructions CAUTION IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS • Do not use seasonal products outdoors where small children can reach it. unless marked suitable for indoor and • Do not let lamps rest on the supply outdoor use.
  • Page 2 For Indoor or Outdoor Display BULB REPLACEMENT INSTRUCTIONS Retain carton for storage purposes 1. Unplug light string from power source. Fig. 1 2. Pull up on the Bulb Lock (if equipped) ASSEMBLY: unlatching the bulb from the bulb socket. Place the tree base on a sturdy surface Gently pull the bulb straight out (Figure 1).