Operation Procedure - Hitachi PSC-A1T Installation And Operation Manual

CHANGING WEEKLY SCHEDULE PATTERN (A OR B)
There are 2 (two) patterns (A or B) set for the weekly schedule.
Each pattern can be set with 3 (three) times ON/OFF settings for each
weekly day.
<Function>
To select the pattern for setting and operating the schedule.
The schedule of A or B pattern can be set for each week and
changed for a season.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode and the "SET"
indication is turned on.
2. Depress the "A/B" switch.
The set pattern is changed ("A" to "B") by depressing the "A/B"
switch.
The right figure shows the case of selecting the set pattern "B".
3. Depress the "SET/MONITOR" switch.
The "SET" mode is turned off and the setting mode is changed to
the monitor mode.
SETTING ON/OFF TIME
(<Example> "A" pattern, Friday, Setting 2, PM 1:00 (ON) / PM
5:00 (OFF)
A. In case that the remote control switch (PC-2H2) or the one-
touch controller (PSC-A16RS) is used together, both setting of
ON TIME and OFF TIME are required for setting 1, 2 and 3.
(The setting of ON TIME (or OFF TIME) only is not available).
B. In case that the other controller is used together, the setting of
ON TIME (or OFF TIME) only is available.
C. During the timer pause mode, the mode is not changed to the
setting mode by depressing the "SET/MONITOR" switch.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode, the "SET"
indication is turned on and the " " mark is flickered.
The right figure shows the case of changing to the setting
mode.
2. Select "A" or "B" pattern by depressing the "A/B" switch.
Refer to "B". Changing weekly Schedule pattern A or B for
changing the pattern

OPERATION PROCEDURE

/
11
7
ATTENTION: