eMachines M2350 Network Manual page 14

Networking Your Notebook
5
Click the network you created in the
then click
to "Testing your network" on page
-OR-
If you are unable to connect to the network in the
network
point" on page
-OR-
If your network does not appear in the
go to "Adding an access point" on page
Help and
Support
Configuring computer settings for an access point
If you are unable to connect to an access point in the
list, the most likely cause is that the access point is using WEP
network
security. You need to configure your network settings to use the same
WEP security settings as those used by the access point.
To configure computer settings with WEP security for an access point
wireless network:
1
With the Wireless Network Connection dialog box open, click
advanced settings
box opens.
Important
12
. If you successfully connected to the network, go
Connect
list, go to "Configuring computer settings for an access
12.
For more information about connecting to a wireless
network, click Start, then click Help and Support. Type
the keyword connecting to wireless network in the
Search box
. The Wireless Network Connection Properties dialog
If the Wireless Network Connection dialog box is not open,
follow the instructions in
on page
www.eMachines.com
Choose a wireless network
17.
Choose a wireless network
14.
"Connecting to your access point"
11.
list,
Choose a wireless
list,
, then click the arrow.
Choose a wireless
Change