Studio Dante 5402 User Manual
  1. Manuals
  2. Brands
  3. Studio Manuals
  4. Clock
  5. Dante 5402
  6. User manual
Studio Dante 5402 User Manual

Studio Dante 5402 User Manual

Leader clock with gnss synchronization
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model 5402
Dante® Leader Clock
with GNSS Synchronization
User Guide
Issue 4. August 2021
This User Guide is applicable for serial numbers
M5402-00151 and later with Main MCU Firmware 1.01 and later
and Dante Firmware version 1.2.0 and later
Copyright © 2021 by Studio Technologies, Inc., all rights reserved
studio-tech.com
50703-0821, Issue 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dante 5402 and is the answer not in the manual?

Questions and answers

Summary of Contents for Studio Dante 5402

  • Page 1 Issue 4. August 2021 This User Guide is applicable for serial numbers M5402-00151 and later with Main MCU Firmware 1.01 and later and Dante Firmware version 1.2.0 and later Copyright © 2021 by Studio Technologies, Inc., all rights reserved studio-tech.com 50703-0821, Issue 4...
  • Page 2 This page intentionally left blank.

  • Page 3: Table Of Contents

    Appendix E–Model 5402 Default Configuration Values ............56 Appendix F–PTPv2 (IEEE® 1588-2008) Default Characteristics ...........57 Appendix G–Accessing the Unit when User Name and/or Password are Not Known ....58 Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 3...

  • Page 4: Revision History

    Issue 2, July 2021: • Documents support for 176.4 and 192 kHz sample rates. • Miscellaneous corrections and clarifications. Issue 1, May 2021: • Initial release. Issue 4, August 2021 Model 5402 User Guide Page 4 Studio Technologies, Inc.

  • Page 5: Introduction

    Leader clock for the entire Dante “network.” And, as mobile broadcast facilities, post-production studios, Figure 1. Model 5402 Dante Leader Clock with GNSS Synchronization front and back views Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 5...
  • Page 6 Video reference (“sync”) signals are found in most lites currently “fixed” (locked) and the receiver input broadcast and post-production facilities. The Model power can also be observed. Issue 4, August 2021 Model 5402 User Guide Page 6 Studio Technologies, Inc.
  • Page 7 By utilizing GNSS, multiple Model 5402 optimized for use in specific applications. units can be installed at independent locations while Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 7...

  • Page 8: Installation

    Model 5402 using standard RJ45 ernet connections can be made to the Model 5402’s patch cables. two Dante Ethernet ports. This will enable Leader clock capability for redundant Dante applications. Issue 4, August 2021 Model 5402 User Guide Page 8 Studio Technologies, Inc.
  • Page 9 DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION AC mains power can be connected to the Model 5402 Studio Technologies’ order code ANT-GNSS-01, is a by means of a detachable cord that is compatible with premium-quality device that will support reception of the unit’s 3-pin IEC 320 C14 inlet connector.
  • Page 10 Dante Primary Dante Secondary Management Switched+Mgmt Dante and Management Disabled Redundant+Mgmt Dante Primary and Management Dante Secondary Disabled Figure 3. Model 5402 Ethernet Port Configuration and Operation Issue 4, August 2021 Model 5402 User Guide Page 10 Studio Technologies, Inc.
  • Page 11 “looping” to access the Model 5402’s manage- ment port is not recommended. It will function reliably Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 11...

  • Page 12: Dante Configuration

    Dante Controller but the default tion will typically be done with the Dante Controller values are typically correct. software application, available for download free of Issue 4, August 2021 Model 5402 User Guide Page 12 Studio Technologies, Inc.
  • Page 13 IP address, separate Ethernet LAN connections should be made subnet mask, and gateway address values. to the Dante primary and Dante secondary RJ45 Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 13...

  • Page 14: Model 5402 Configuration

    As such, a user can simply observe the sequencing menu pages and watch for the one that displays the current management IP address. If it’s desired that the Issue 4, August 2021 Model 5402 User Guide Page 14 Studio Technologies, Inc.
  • Page 15 Model 5402 is actively playing as PTPv1 and PTPv2 timing resources for the devices connected to the associated network or networks. Details about these fields are provided in the Main menu paragraphs found later in this section. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 15...
  • Page 16 Main menu webpage will display. If an incorrect user name and/or pass- word is entered then a login failed message will be displayed. Issue 4, August 2021 Model 5402 User Guide Page 16 Studio Technologies, Inc.
  • Page 17 This would be, assum- factory-directed activities. It’s not expected that this ing that a solid GNSS “lock” can be established, the Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 17...
  • Page 18 In addition, the display will provide a text indication of this condition. Issue 4, August 2021 Model 5402 User Guide Page 18 Studio Technologies, Inc.
  • Page 19 MAC address is not for this specific Model 5402 SMA jack. This could be indicative of a short circuit in the text will show (Other Device). Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 19...
  • Page 20 If Follower is displayed this (IEEE 1588-2008). As such the unit is capable of indicates that this specific Model 5402 is obtaining its timing reference from another Dante device on Issue 4, August 2021 Model 5402 User Guide Page 20 Studio Technologies, Inc.
  • Page 21 Model 5402 is having a permanent or tempo- rary issue with its internal circuitry. There may be oc- casions where Error would display for a few seconds while Model 5402 circuitry first becomes active. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 21...
  • Page 22 SMA plug and cable that is used to link the Model ellites. This number will typically only be useful when 5402 with the antenna. troubleshooting a Model 5402 issue with the factory. Issue 4, August 2021 Model 5402 User Guide Page 22 Studio Technologies, Inc.
  • Page 23 GPS constellation. It can be enabled as desired for an application. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 23...
  • Page 24 If the Model 5402’s clock source has been selected to connected to the sync input or a non-compatible signal Sync Input on the Main menu the type of connected Issue 4, August 2021 Model 5402 User Guide Page 24 Studio Technologies, Inc.
  • Page 25 10 MHz signal. All compatible signals will work well but using a source of word clock requires the least logic “horsepower.” Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 25...
  • Page 26 Each subsequent channel then re- level for each of the audio output channels is inde- duces its level by 1 dB. So, for example, the second Issue 4, August 2021 Model 5402 User Guide Page 26 Studio Technologies, Inc.
  • Page 27 To save any changes made to the level or frequency fields requires that the Submit button be pressed. Changes will be made immediately after pressing the Submit button. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 27...
  • Page 28 Dante secondary interface by the Model 5402’s back panel. Link Down will display if link-local will have a format of 172.31.x.x. The Dante Issue 4, August 2021 Model 5402 User Guide Page 28 Studio Technologies, Inc.
  • Page 29 This setting has no impact will always be 255.255.0.0. on how the Model 5402 obtains IP addresses for the Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 29...
  • Page 30 Reboot function on the system out and the value cannot be revised. Whenever the webpage or a selection on the front panel’s menus. IP address configuration is selected for Manual the Issue 4, August 2021 Model 5402 User Guide Page 30 Studio Technologies, Inc.
  • Page 31 These include upper and lower alphabetic characters, numbers, and standard punctuation marks. Confirm New Password: For a new password to be considered valid, enter it identically into this field. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 31...
  • Page 32 (The Dante interface is implemented using a Brooklyn this guide. II module from Audinate.) This version number is as- signed by Studio Technologies as an identifier when Main FPGA Firmware: This display-only field that a file is released that combines specific Model 5402...

  • Page 33: Operation

    Company Name Link: On the bottom of each web- cannot be field updated. page is a link with the title Studio Technologies, Inc. Clicking on this link will cause the browser to open the Restore Default Settings: The Restore Default Set- Home webpage of the Studio Technologies website.
  • Page 34 MGMT, is associated with the unit’s management connection is present on the Dante primary or Dante secondary Ethernet ports. It will light green whenever Ethernet port. The way in which the three Ethernet Issue 4, August 2021 Model 5402 User Guide Page 34 Studio Technologies, Inc.
  • Page 35 GNSS receiver or the sync input, but is The SYS LED will light red to indicate that the Dante not able to do so. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 35...
  • Page 36 SYNC IN LED ACT (Green): Off if no data traffic; flashes to show will function in a slightly different manner. It will light data traffic. Issue 4, August 2021 Model 5402 User Guide Page 36 Studio Technologies, Inc.
  • Page 37 Refer to Appendix D for the menu to a constellation. Error would indicate a problem with structure diagram. the Model 5402’s circuitry being able to communicate with the GNSS receiver circuitry. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 37...
  • Page 38 Model 5402’s manually assigned with a fixed or static IP address. If internal GNSS receiver. The value for the number Issue 4, August 2021 Model 5402 User Guide Page 38 Studio Technologies, Inc.
  • Page 39 Use the left and right arrow buttons will display to indicate that an edit is in process. Use to select the desired method. Then again press the Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 39...
  • Page 40 Dante interface will continue to check for the presence of a DHCP server. If one becomes available then an IP address will be requested and, when obtained, will Issue 4, August 2021 Model 5402 User Guide Page 40 Studio Technologies, Inc.
  • Page 41 This will be indicated net mask value requires that the unit’s Dante interface by a circle with arrows icon that will show in the up- Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 41...
  • Page 42 Audinate. This version number is as- the Dante interface press the Enter pushbutton on the signed by Studio Technologies as an identifier when unit’s front panel. This will lead to a confirmation page a file is released that combines specific Model 5402 being displayed.

  • Page 43: Technical Notes

    If the Model 5402’s Dante interface has been config- ured in the Dante Controller application for Switched 1. The Studio Technologies’ company logo graphic. or Switched+Mgmt operation, by default the Model 2. The product name (Model 5402) and the Dante 5402’s Dante primary Ethernet interfaces will attempt...
  • Page 44 VoIP QoS (voice-over-internet-protocol Refer to the Studio Technologies’ website for the lat- quality of service) capability is recommended. This est firmware files. The Model 5402 has the ability to...
  • Page 45 The latest Model 5402 firmware file, with an exten- save the new firmware file(s) that are present on sion of .dnt, is available on the Studio Technologies’ the USB flash drive. The update process can range website as well being part of Audinate’s product library from approximately 10 seconds to approximately database.
  • Page 46 By performing As is covered in detail in other sections of this guide, a web search Studio Technologies’ factory personnel gaining access to the Model 5402’s configuration were able to locate several compatible antennas that...
  • Page 47 Model 5402 be thoroughly tested together. Only a “reality check” over a period of a day or so will ensure proper operation. Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 47...

  • Page 48: Specifications

    802.3ab (100 Mb/s supported but not recommended 10 MHz Signal Compatibility: sine wave, 3 Vpp for optimal performance; 10 Mb/s not supported) nominal into 50 ohm load Issue 4, August 2021 Model 5402 User Guide Page 48 Studio Technologies, Inc.
  • Page 49 Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F) Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F) Humidity: 5 to 95%, non-condensing Altitude: not characterized Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 49...

  • Page 50: Appendix A-Compatible Sync Input Sources

    720p/60 Hz 1080psf/23.98 Hz 1080psf/24 Hz 1080i/50 Hz 1080i/59.94 Hz 1080i/60 Hz 1080p/23.98 Hz 1080p/24 Hz 1080p/25 Hz 1080p/29.97 Hz 1080p/30 Hz 1080p/50 Hz 1080p/59.94 Hz 1080p/60 Hz Issue 4, August 2021 Model 5402 User Guide Page 50 Studio Technologies, Inc.

  • Page 51: Appendix B-Network Configuration Examples

    Model 5402 DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION Appendix B–Network Configuration Examples Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 51...
  • Page 52 Model 5402 DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION Issue 4, August 2021 Model 5402 User Guide Page 52 Studio Technologies, Inc.
  • Page 53 Model 5402 DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 53...

  • Page 54: Appendix C-Dante Controller Network Default Configuration Values

    Network Config, Addresses: Obtain an IP Address Automatically (default) AES67 Config, AES67 Mode, Current: Disabled Leader Clock, Preferred Leader: Enabled Leader Clock, Enable Sync to External: Enabled Issue 4, August 2021 Model 5402 User Guide Page 54 Studio Technologies, Inc.

  • Page 55: Appendix D-Front-Panel Menu Structure

    Model 5402 DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION Appendix D–Front-Panel Menu Structure Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 55...

  • Page 56: Appendix E-Model 5402 Default Configuration Values

    Access Menu, Management Login Credentials: User Name: guest Password: guest (Note: Using the Restore Default Settings command in the System menu does not restore these items to their default configuration values.) Issue 4, August 2021 Model 5402 User Guide Page 56 Studio Technologies, Inc.

  • Page 57: Appendix F-Ptpv2 (Ieee® 1588-2008) Default Characteristics

    2. These default configuration characteristics apply to both the Dante primary and Dante secondary Ethernet interfaces. Domain: 0 Priority 1: 114 Clock Class: 248 Accuracy: Unknown (0xFE) Variance: 61536 Priority 2: 112 Unique ID: 00:1D:C1:XX:XX:XX DSCP: EF (46) Model 5402 User Guide Issue 4, August 2021 Studio Technologies, Inc. Page 57...

  • Page 58: Appendix G-Accessing The Unit When User Name And/Or Password Are Not Known

    Enter and confirm a new password. Henceforth, to access the Model 5402’s Configuration menu will require the use of the stored user name and password. Issue 4, August 2021 Model 5402 User Guide Page 58 Studio Technologies, Inc.

Table of Contents