Table of Contents
Advertisement
Windows EDID V1.0 User Manual
Operating System: DOS, windows98, 2000, XP
1. Parallel port setting
Enter your bios，and do as followings.
a) Integrated peripheral
b) Super IO Device
c) Parallel port mode
you should set the" parallel port mode" to SPP for using
the DOS EDID tool surely.
2. EDID Write
① Run D20FNL.EXE. And choose 1 to write.
② choose panel type
③ if you get the right panel type, the you can go to the
next step; if not ,the panel type loop will continue. For
All manuals and user guides at all-guides.com
ADJUSTMENT
example, your monitor use the CMO Panel ,then you
should assure a certain digit(usually the sixteenth or
seventeenth digit for LG) of your input panel check
number is 'q' or 'Q'.
④ input serial NO.
For LG , the number of SN is 12. So input 12 digits，then
EDID data will be send to the monitor from PC.
15
Advertisement
Table of Contents
