Bernini Luigi Instructions

ASSEMBLY:

Step 1:

Remove the Luigi
Bird Feeder and all
parts from the
packaging
(Figure 1).
See parts list
below.
Figure 1

PARTS:

Wing Nuts
& Washer X5
Bird Food
Cups X5
January 2021 © Yeiser Research & Development LLC and Bernini Fountains® Trade names, product names and logos
used in this document are the trademarks or registered trademarks of Yeiser Research & Development LLC, Santee, CA 92071
Figure 2

Step 2:

Assemble the plastic Bird Food cups using the Wing Nuts/Washers (Figure 2). Insert the hardware through the Plastic Bird Food Cup
(Figure 3) into the receiving end of the Bird Feeder (Figure 4). Repeat this step for all 5 Bird Food Cups (Figure 5).
Figure 5
Bird Feeder
Base X1
Luigi Bird Feeder Instructions
Figure 3
Figure 6

Step 3:

Adjust each of the Bird Feeder Connecting
Rods using the adjustment screw at the
Connecting Rod end, opposite of the Bird
Food Cups (Figure 6).
Figure 4
Figure 7

Step 4:

Hang the Bird Feeder In your preferred
location and ll with bird food (Figure 7).
NOTE: Ensure Connecting Rods of the Bird
Feeder are positioned in a way that Bird
feeder will hang balanced and even.