Advertisement
I
NSTALLING THE
To install the Summit RPS, follow these steps:
1 Mount the Summit RPS in the equipment rack, or, if the RPS will be located on a
table, place the rubber feet on the bottom of the Summit RPS.
For more information on installing the mounting brackets, see the Summit Switch
Installation and User Guide .
2 Using the supplied DC power cables, connect the cables of the RPS to each Summit
Switch.
The RPS DC cable must be connected to the Summit Switch prior to connecting
the respective RPS AC power cord to the AC outlet.
3 Tighten the screws connecting both sides of the RPS cable.
If you do not tighten the screws on both sides of the RPS cable, the cable could
come loose and emit sparks.
4 Connect an AC power cord to each power socket.
5 Plug the power cords into properly grounded AC outlets.
When disconnecting the RPS, the AC power cords must be removed from the
Summit RPS before removing the RPS DC cables.
T
ECHNICAL
The following tables list the technical speciÞcations for the Summit RPS.
Physical Dimensions
Environmental Requirements
Operating temperature
Storage temperature
Operating humidity
Standards
S
R
P
S
UMMIT
EDUNDANT
OWER
UPPLY
S
UMMIT
S
PECIFICATIONS
Height: 3.5 inches x Width: 17.32 inches x Depth: 17.32
inches
Weight: 10 kg
0 to 40˚ C
-10 to 70 ˚ C
10% to 95% relative humidity, noncondensing
EN60068 (IEC68)
I
G
NSTALLATION
UIDE
RPS
I
S
RPS
NSTALLING THE
UMMIT
5
Advertisement
