Advertisement
Quick Links
Item #01491
A - Front Panel
Step 1
Align and Attach Side Panel (B) hinges to
Front Panel (A) by using 8- 1" Bolts.
Step 3
Unfold Top Panel (C). Align
Holes with Side Panels (B)
and Front Panel (A). Secure
Panels together using 14-
2" Bolts.
Note: small section
goes towards the
back of Pen.
Hutch
HD Chick-N-Rabbit Pen
B - Side Panels (x2)
C - Top Panel
D - Back Panel
Step 2
Attach
Floor Brace
to the front
of Pen using
1- 1½" Wood
Screw on each
Side Panel.
PARTS DESCRIPTION:
8 - ½" Wood Screws
8 - 1 " Bolts
4 - 1½" Wood Screws
16 - 2 " Bolts
Floor Braces (x2)
All wire must face into the cage
Floor Brace in Front
small section
Assembly
Instructions
#30001491
4 - L Brackets
Advertisement
Summary of Contents for Ware Manufacturing HD Chick-N-Rabbit Pen
- Page 1 Hutch Assembly HD Chick-N-Rabbit Pen Instructions Item #01491 #30001491 PARTS DESCRIPTION: 8 - ½" Wood Screws 4 - L Brackets 8 - 1 ” Bolts 4 - 1½" Wood Screws 16 - 2 ” Bolts A - Front Panel B - Side Panels (x2)
- Page 2 Step 4 Step 5 Line up the left and right sides of the HD Chick-N-Rabbit Pen to Hutch. Remove wingnut from the upper front side of Hutch and attach "L" shaped bracket using the same wingnut. Secure bracket with 2- ½" Wood Screws. Repeat step for lower Attach Back Panel (D) to the bottom front side bracket.