Related Manuals for Philips 253M7
Summary of Contents for Philips 253M7
- Page 1 253M7 www.philips.com/welcome EN User manual Customer care and warranty 18 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
5.1 Resolution & Preset Modes ..16 6. Power Management ....17 7. Customer care and warranty ... 18 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ......18 7.2 Customer Care & Warranty ..21 8. Troubleshooting & FAQs ..22 8.1 Troubleshooting ...... -
Page 3: Important
• Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center. - Page 4 1. Important brightness, avoid the fluorescent • Temperature: 0-40°C 32-104°F lighting, and surfaces that don’t • Humidity: 20-80% RH reflect too much light. • IMPORTANT: Always activate a mov- • Seeing a doctor if your symp- ing screen saver program when you toms.
-
Page 5: Notational Descriptions
1. Important Note 1.2 Notational Descriptions Consult a service technician if the The following subsections describe monitor does not operate normally, or notational conventions used in this you are not sure what procedure to take document. when the operating instructions given in this manual have been followed. -
Page 6: Disposal Of Product And Packing Material
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- This marking on the product or on back initiatives and recycling programs... -
Page 7: Setting Up The Monitor
(1) Gently attach the stand to the User’s Manual 保留备用 Monitor drivers VESA mount area. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. (2) Use a screwdriver to tighten the assembly... -
Page 8: Operating The Monitor
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description AC power input VGA input HDMI input HDMI audio out Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. - Page 9 Sub menu LowBlue Mode 1, 2, 3 What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in Input all Philips LCD monitors. It allows an end HDMI1.4 user to adjust screen performance or Picture Picture Format Wide Screen, 4:3...
- Page 10 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 ×...
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. VESA Mounting Screw M4. Always Remove the Base Stand contact manufacturer for wall-mount Before you start disassembling the installation. -
Page 12: Image Optimization
There are multiple selections: FPS, in real time. Whether you're working Racing, RTS, Gamer1, Gamer2, LowBlue with text applications, displaying images Mode and Off. or watching a video, Philips SmartImage delivers great optimized monitor SmartImage GAME performance. Why do I need it? -
Page 13: Smartcontrast
What is it? time. Developed for wellbeing, Unique technology that dynamically Philips LowBlue Mode setting uses a analyzes displayed content and smart software technology to reduce automatically optimizes a Monitor's harmful shortwave blue light. -
Page 14: Freesync
4. FreeSync • AMD Radeon R9 Fury X 4. FreeSync • AMD Radeon R9 360 • AMD Radeon R7 360 • AMD Radeon R9 295X2 • AMD Radeon R9 290X • AMD Radeon R9 290 • AMD Radeon R9 285 •... -
Page 15: Technical Specifications
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED system Panel Size 24.5" W (62.2 cm) Aspect Ratio 16:9 Pixel Pitch 0.280 x 0.280 mm SmartContrast 50M:1 Response Time (typ.) 5ms (typ, on/off) Smart Response (typ.) 1ms (GtG) Optimum Resolution 1920 x 1080 @ 60Hz Viewing Angle (typ.) - Page 16 5. Technical Specifications Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC, 50Hz at 115VAC, 50Hz at 230VAC, 50Hz Normal Operation 23.05 W (typ.) 23.15 W (typ.) 23.25 W (typ.) Sleep(Standby) <0.5 W <0.5 W <0.5 W <0.3 W <0.3 W <0.3 W...
- Page 17 Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 18: Resolution & Preset Modes
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (analog input) H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480... -
Page 19: Power Management
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 20: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced manufacturing... - Page 21 'off'. That is, the warranty period, a TFT Monitor a dark dot is a sub-pixel that stands out panel in a Philips flat panel monitor on the screen when the monitor displays a must have pixel or sub pixel defects light pattern.
- Page 22 7. Customer care and warranty Note 1. 1 or 2 adjacent sub pixel defects = 1 dot defect 2. This monitor is ISO9241- 307 compliant.(ISO9241-307: Ergonomic requirement , analysis and compliance test methods for electronic visual displays) 3. ISO9241-307 is the successor of formerly known ISO13406 standard, which is withdrawn by the International Organisation for...
-
Page 23: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 24: Troubleshooting & Faqs
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position. -
Page 25: General Faqs
For further assistance, refer to the An "after-image", "burn-in" or "ghost Consumer Information Centers list image" remains after the power has and contact Philips customer service been turned off. representative. • Uninterrupted display of still or static images over an extended period may cause "burn in", also known as... - Page 26 • Shut down your computer, subjected to excessive shocks disconnect your old monitor and and is protected from sharp or reconnect your Philips LCD monitor. blunt objects. When handling the • Turn on your monitor and then turn monitor, make sure that there is on your PC.
- Page 27 PC, workstation or Mac? repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations. You Q12: Why is my Display not showing...
- Page 28 Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.