Pairing With Other Bluetooth Devices - ION iCade jr. Quick Start Manual

PAIRING WITH OTHER BLUETOOTH DEVICES

1. Power on iCade jr.
2. Go to your phone's Bluetooth settings menu to turn on Bluetooth.
3. Hold down the 4 buttons on the rear panel of iCade jr. simultaneously
jr.for 5 seconds
four buttons.
4. Enable your phone to scan for Bluetooth devices.
5. iCade jr. will appear as "ION iCade jr."
device.
Notes:
•
After a period of inactivity, iCade jr. will enter "power saver" mode. To wake it up,
simply move any of its controls. Both iCade jr. and iPhone/iPod touch will turn on
again.
•
After iCade jr. is connected to iPhone/iPod touch as a Bluetooth device, you can
remove iPhone/iPod touch, move it to another location, turn it off, etc. Next time
you want to use iCade jr. with the same device, simply activate Bluetooth on your
device, turn iCade jr. on, and press any button on iCade jr. iCade jr. will reconnect
instantly with your device as long as it is within range.
•
To use iCade jr. with a different iPhone/iPod touch, or to re-establish a manually
deactivated Bluetooth connection, repeat the INITIAL SETUP steps.
•
Avoid storing the unit in high temperature with the batteries installed.
For an up-to-date list of additional ION Arcade-compatible games, visit:
or until iCade jr.'s Bluetooth light starts blinking, then release all
www.ionaudio.com/icadegames
Select it to pair it with your Bluetooth
5
on iCade