Quick Installation - ViewSonic XG240R User Manual

2-4. Quick Installation

Connect Signal Cables
1. Make sure both the LCD monitor and computer are turned OFF.
2. Remove rear panel covers if necessary.
3. Connect the signal cables from the LCD monitor to the
computer.
Macintosh users: Models older than G3 require a Macintosh
adapter. Attach the adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
Customer Support.
Macintosh adapter, contact ViewSonic
®
Audio out
USB Port
HDMI
DisplayPort SUB
14
Power Connector