Table of Contents
Advertisement
Card Reader:
2.
Insert memory cards into these slots.
Hard Disk Drive LED:
3.
This LED lights up to indicate that the hard drive is being accessed.
Power Button & Power Indicator:
4.
Use this button to turn the IMPACT PC on and off. If the button is held
down for one second, the system will enter Suspend mode. If held
down for four seconds, system power will switch off. When lit, the Power
indicator shows blue to indicate that system power is on.
USB Port (2):
5.
Up to two USB devices can be connected via these ports; there are four
additional ports at the rear – see below.
Microphone-In Jack (pink):
6.
Plug the microphone into this jack for recording or voice-control
functions.
Speaker Jack (light green):
7.
Connect audio devices, such as headphones or speakers, to this jack
SYSTEM OVERVIEW
5
Advertisement
Table of Contents
