Lookee Pulsebit EX User Manual

User Manual
Pulsebit EX
Personal ECG Tracker
Customer Support:
Email: Support@LookeeTech.com
Facebook Messenger: Search "LookeeTech"
Register Product and Claim One-Year Warranty at
www.LookeeTech.com
Disclaimer
It's not a medical device and should not be used for any
medical purpose or any medical condition. This product is
intended only for general wellness use.
Caution
This product is not for people wearing a pacemaker.
Unpacking
Main Unit; Quick Guide; Charging & Data USB Cable
ECG Cable; 5 sets Reusable ECG Electrodes, Carry Case
About the main unit
Charging
With the charging cable, connect the device to the USB port
of personal computer (PC) or standard USB charging
adapter.
Power ON/OFF
Press and hold the button for 1 second to power ON, Press
and hold 3 seconds to power OFF.
It will turn off automatically if no measurement or operation.
Important Setting
User Mode: Settings->Single User/Dual User
ECG Length: Settings->ECG Length, for 30s/60s/5 minutes
Note: only cable measure is supported in 5 minutes mode
Check the Heart - Internal
1) Touch <HeartCheck> to start a measure, select MODE
2) Hold the device as MODE I or MODE II, keep still and
wait until the process bar ended
MODE I (LEAD I) MODE II (LEAD II)
Check the Heart - External (by cable)
1) Touch <HeartCheck> to start a measure, touch the
icon at the bottom to switch to External mode.