Advertisement
Table of Contents
SWCH500 Manual AW (Rev) 2018.qxp_Layout 1 20/07/2018 11:23 Page 1
12Volt
Heater & Defroster
SWCH500
NOTICE: To prevent blowing a fusible
link on the Power Socket, only use with
15 Amp rated Power Socket receptacle.
1. Place the Power Switch in the O (off)
position. Plug the 12V Power Socket
into the vehicle's 12V Power Socket
receptacle.
2. The Heater can be removed from the
Mounting Base. By holding the Handle
and sliding it off the base plate.
The Heater can be moved around as
needed on the ball and socket joint.
Please read and understand these instructions before any use of this
product and retain for future reference.
3. To operate, press the Power
Switch to I or II depending on
the strength of the heat required.
Toggle the Power Switch to the
center position to turn off (O).
WARNING! Do not operate longer
than 15 minutes at one time, allow
heater to cool completely after use.
4. Unplug the Heater before
leaving the vehicle.
Advertisement
Table of Contents
Related Manuals for Streetwize SWCH500
Summary of Contents for Streetwize SWCH500
- Page 1 SWCH500 Manual AW (Rev) 2018.qxp_Layout 1 20/07/2018 11:23 Page 1 12Volt Heater & Defroster SWCH500 3. To operate, press the Power NOTICE: To prevent blowing a fusible link on the Power Socket, only use with Switch to I or II depending on 15 Amp rated Power Socket receptacle.
- Page 2 SWCH500 Manual AW (Rev) 2018.qxp_Layout 1 20/07/2018 11:23 Page 2 1. This product is not a toy. Do not allow children to play with or near this item. 2. The Heater's base can be mounted to the vehicle using Mounting Screws or the Adhesive Strip as desired.
Need help?
Do you have a question about the SWCH500 and is the answer not in the manual?
Questions and answers