Download Print this page

i3 International 4i00XX Series Quick Connection Manual

Advertisement

Quick Links

Firewire
(Not in Use)
eSATA
Quick Connection Guide 4i00XX-series
(Not in Use)
DVI
(Not in Use)
USB 3.0
USB 2.0
DisplayPort connector
(Not in Use)
DVD Drive
Power Supply.
Auto Switchable (110/240 AC)
1-16 Video In (Analog)
1-16 Video Out (Analog)
HDD1 SATA
1-16. 75 Ω Impedance
HDD2 SATA
DVI-I to VGA Monitor Port
Firewire
(Not in Use)
HDD3 SATA
eSATA
(Not in Use)
DVI
(Not in Use)
USB 2.0
USB 3.0
DisplayPort connector
(Not in Use)
Power Supply.
Auto Switchable (110/240 AC)
DVI-I to VGA
Monitor Port
Internet Port
Main Power Supply.
Auto Switchable (110/240 AC)
Firewire
(Not in Use)
eSATA
1-16 Video In (Analog)
(Not in Use)
DVI
1-16 Video Out (Analog)
(Not in Use)
USB 2.0
USB 3.0
DisplayPort connector
(Not in Use)
1-16. 75 Ω Impedance
DVI-I to VGA Monitor Port
Firewire
(Not in Use)
Uninterrupted power supply (UPS) (min. 1000VA) must always be used with the i3 DVMS;
eSATA
(Not in Use)
otherwise, all warranties will be voided.
DVI
(Not in Use)
USB 2.0
USB 3.0
DisplayPort connector
(Not in Use)
i3 Technical Support: 1.877.877.7241
Main Power Supply.
Sensor Inputs (2)
Audio Input (Not in Use)
Control Outputs (2)
Speaker Output (Not in Use)
RS-485 (PTZ)
Power
Mic Input (Not in Use)
Button
1-16 External
RCA Outputs
WD SWITCH
1-16 External
VGA Outputs
POWER
WD
Internet Port
REC
1-8 Audio
Inputs
Sensor Inputs (2)
Audio Input (Not in Use)
Control Outputs (2)
USB 2.0
Speaker Output (Not in Use)
RS-485 (PTZ)
Mic Input (Not in Use)
1-16 External
RCA Outputs
Sensor Inputs (2)
Audio Input (Not in Use)
Control Outputs (2)
Auto Switchable (110/240 AC)
Speaker Output (Not in Use)
RS-485 (PTZ)
1-16 External
Mic Input (Not in Use)
VGA Outputs
Internet Port
1-8 Audio
Inputs
Sensor Inputs (2)
Audio Input (Not in Use)
Control Outputs (2)
Speaker Output (Not in Use)
RS-485 (PTZ)
Mic Input (Not in Use)
Power Toggle Switch
USB 2.0
1-16 Video In (IP)+ PoE
PoE Power Supply.
Power Toggle Switch
REC
Thank you for purchasing the i3 Digital Video Management System
(DVMS). The following items should be included in the i3 DVMS box.
If any of these items are missing, please contact your dealer or call
our Customer Care Department toll free at 1.866.840.0004.
Standard accessories:
• HDD SATA keys (2 pcs)
• DVMS door keys (2 pcs), attached to the back of the unit
• DVI to VGA adapter
• USB keyboard
• USB mouse
• Power cord
• SRX-Pro Software & Utilities DVD
• Motherboard CD(s)
• Security labels (2 pcs)
• Optional. Wallmount bracket (2 pcs) + bracket screws (8 pcs)
• Optional. Rackmount bracket (Ear x 2 pcs, Aluminum handle x 2
pcs) + bracket screws (6 pcs)
Installation Requirements:
When selecting a storage location for your system, be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• moisture, dust, and smoke
• magnetic fields or electrical waves
• temperatures below 5º Celsius or 41º Fahrenheit
• any obstructions to the system's ventilation holes
Before installing this system, always ensure the:
• power source is located within 3 feet or 1 meter of the UPS
• power is switched off (**Do not plug in the DVMS unit)
• system and its connecting cables have sufficient space system is
placed on an even surface system is situated far from electronic
equipment such as microwaves, radios, fridge compressors,
or any type of wireless equipment such as telephones or cell
phones)
• system is at room temperature (18º – 25º C or 64º – 77º F)
Rev. 150202

Advertisement

loading

Summary of Contents for i3 International 4i00XX Series

  • Page 1 Firewire Power Toggle Switch (Not in Use) eSATA Quick Connection Guide 4i00XX-series (Not in Use) Sensor Inputs (2) (Not in Use) Audio Input (Not in Use) Control Outputs (2) USB 2.0 Speaker Output (Not in Use) USB 3.0 USB 2.0 Thank you for purchasing the i3 Digital Video Management System DisplayPort connector RS-485 (PTZ)
  • Page 2 All DVMS units sold by i3 International are pre-set to Eastern Time zone (GMT -5:00). It is that you configure the time zone setting on the first system startup according to the physical location of the unit. If the DVMS is later re-located to a different time zone, this setting must be changed once again.