Page 1
Brook POU Water Dispenser User and Care Manual Model No.: SOBK210EPOU SOBK210MPOU Please read the manual carefully before operating your water dispenser. Retain it for future reference.
SAFETY PRECAUTIONS To reduce risk of injury and property damage, user must read this entire guide before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at above 176℉ . Failure to use properly can cause personal injury.
Do NOT use dispenser if cord becomes frayed or otherwise damaged. To protect against electric shock, do NOT immerse cord, plug, or any other part of dispenser in water or other liquids. Ensure dispenser is unplugged prior to cleaning. Service should be performed only by a certified technician. Never turn the machine upside down or lean it more than 45 degree.
Parts Name Parts Name Hot water push button with safety lock (only available for Filter bracket SOST210MPOU) Cold water push button (only Water inlet available for SOST210MPOU) LED display Leak detector Nozzle Drain valve Lower door Hot switch Drip tray Lower door latch OPERATION INTERFACE...
Page 5
Dispense hot water: touch safety lock icon until a beep is heard, then release the safety lock icon and touch the hot water icon within 3 seconds (model # SOBK210EPOU), or ( for model # SOBK210MPOU) unlock safety lock, then depress hot water push button to dispense hot water.
Page 6
4. Connect cooler to a 120 volt electrical outlet. 5. Depress safety lock and hot faucet push button (model no.: SOBK210MPOU) or touch safety and hot water icon (SOBK210EPOU) until water flow is continuous and clear. 6. Power on hot switch located at the back of the cooler top left side.
CLEANING To avoid accidents, unplug the appliance from the power supply before cleaning. ALL PLASTIC PARTS ARE DISHWASHER SAFE. Bottle ring, drip tray and cabinet can be cleaned with most mild on-abrasive household cleaners. To prevent damage to plastic parts, avoid abrasive cleaning aids such as steel wool etc.
Page 8
TERMS AND CONDITIONS – This warranty is “limited” to a dispenser installed in non-restricted locations, such as residences or offices. This warranty does not provide any allowances for labor reimbursement. This limited warranty does not offer coverage for components that are not factory installed such as dealer installed accessories not originally sold by this manufacturer.
Page 9
MANUFACTURER’S OBLIGATIONS – The Manufacturer warrants the complete water dispenser including compressor, hermetically sealed refrigeration system, water system faucets, and electrical components to be free from defects in material under normal use for 2 years from date of installation or twenty - seven months from date of shipment from Manufacturer, whichever occurs first.
Page 10
ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO ANY PERSON.