Techome TH528-2 Manual

Two/Four Channel Motor Controller
How to Learn a New Remote
What you need
Procedure
1. Open the enclosure
of the Motor Controller.
2. Press the "LRN" button
on the square circuit board.
*A red light will then flash steadily
3. While on CH 1, Press "Open" on the remote.
(or up for the the slimline or "1" on the key fob).
P: +61 (0)7 3297 9797 A: 33 Perrin Drive, Underwood, QLD, 4119, Australia
*Must have power
If the remote has been successfully learned,
the red light will flash rapidly for 0.5 seconds
Note.
MOTION AND AUTOMATION
E: info@techome.com.au W: www.techome.com.au
The learning mode on the Receiver times out after 30 seconds