Subscribe to Our Youtube Channel
Related Manuals for Gtech CID001
Summary of Contents for Gtech CID001
- Page 1 Cordless Impact Driver CID001 Model number: OPERATING MANUAL 4615_Impact_driver_manual_aw.indd 1 4615_Impact_driver_manual_aw.indd 1 28/10/2020 16:38 28/10/2020 16:38...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS: IMPORTANT: To avoid serious personal injury, do not attempt to use this product until you read the manual thoroughly and understand it complete- ly. Save this manual and review frequently for safe operation and instruct- ing others who may use this tool. Keep this manual for the safety warnings, precautions, operations, inspections and maintenance information. -
Page 3: Electrical Safety
Electrical safety: binding, making it easier to use. • Do not use the tool for anything other • The charger’s power plug must match than its intended use. the outlet. Never modify the plug or try • Do not use the tool if the trigger does to plug the tool into an outlet that does not actuate properly. -
Page 4: Tool Service
Tool service: liquid flush with water and seek medical help. Battery liquid can cause irritation • Only use accessories that are identified or burns. by the manufacturer for the specific tool • Do not store batteries in areas that model. can reach or exceed 105°F. - Page 5 4615_Impact_driver_manual_aw.indd 5 4615_Impact_driver_manual_aw.indd 5 28/10/2020 16:38 28/10/2020 16:38...
-
Page 6: About Your Product
Thank you for choosing Gtech “Welcome to the Gtech family. I started Gtech to create sensible, easy to use products that do a great job, and hope you get many years of troublefree performance from your new product.” Nick Grey –... -
Page 7: Installing And Removing The Battery
Installing and removing the battery To install, simply insert the battery pack. Make sure the latch on the battery snaps in place and battery pack is secured to the tool. To remove, depress the latch..and pull out the battery pack. 4615_Impact_driver_manual_aw.indd 7 4615_Impact_driver_manual_aw.indd 7 28/10/2020 16:38... -
Page 8: Variable Speed Trigger
Variable speed trigger Forward/reverse switch The variable speed trigger (2) delivers higher Set the forward/reverse switch (5) in the OFF speed with increased trigger pressure and (Center lock) position to lock the trigger and lower speed with decreased trigger pressure. help prevent accidental starting when not in To turn on the tool, depress the trigger. -
Page 9: Charging The Battery
Installing and removing drill bit To install the bit, pull the collar (1) of the hex To remove the bit, pull the collar forward to bit chuck forward, insert the bit and release release. Caution: Do not touch a drill bit the collar to lock the bit. -
Page 10: Attaching The Belt Clip
Battery state of charge indicator WARNING: Allow battery to cool down before charging if the battery is hot after continuous use. BATTERY All batteries wear out over time due to normal wear and tear. Do not attempt to disassemble and repair the battery, as this could cause serious burns especially when wearing rings and jewellery. -
Page 11: Maintenance
Maintenance Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and maybe damaged by their use. Use clean cloth to remove dirt, dust, oil, grease, etc. WARNING: Remove the battery from the tool for any inspection, maintenance, and cleaning. Troubleshooting The product isn’t working The battery may have cut out due to... -
Page 12: Product Support
0-2, 900 RPM Max Torque 180Nm WARRANTY – REGISTRATION Visit www.gtech.co.uk/warrantyregistration to register your product to ensure that we have all the information required to provide you with quick and efficient support. You will need your product’s serial code. X-XX-XXX~... -
Page 13: Warranty Terms And Conditions
If your product is within its warranty and has a fault that cannot be resolved from the troubleshooting section or online support, please do the following: • Contact our Gtech Customer Care Helpline on UK: 08000 308 794, who will go through any troubleshooting with you to identify the fault. - Page 14 Notes 4615_Impact_driver_manual_aw.indd 14 4615_Impact_driver_manual_aw.indd 14 28/10/2020 16:38 28/10/2020 16:38...
- Page 15 Notes 4615_Impact_driver_manual_aw.indd 15 4615_Impact_driver_manual_aw.indd 15 28/10/2020 16:38 28/10/2020 16:38...
- Page 16 Grey Technology Limited Brindley Road, Warndon, Worcester WR4 9FB email: support@gtech.co.uk telephone: 08000 308 794 www.gtech.co.uk 4615_Impact_driver_manual_aw.indd 16 4615_Impact_driver_manual_aw.indd 16 28/10/2020 16:38 28/10/2020 16:38...
Need help?
Do you have a question about the CID001 and is the answer not in the manual?
Questions and answers