Advertisement
English
1. Charge
Use the included magnetic induction cable to charge the headset. The LED indicator will change from red to blue when
charging is complete.
02
2. Pair
Start with your headset powered off. Enter pairing mode by pressing and holding the volume+ button until OpenComm
says "pairing" and the LED indicator flashes red and blue.
3. Connect
Open your device's Bluetooth
indicator will flash blue one time when a connection has been established.
How to Set Up OpenComm
menu and select "OpenComm by AfterShokz." OpenComm will say "connected" and the LED
®
Advertisement
