Table of Contents
Advertisement
Quickstart Guide (1 of 3)
Step 1: Attaching Antennas
TIP : For the best Wi-Fi signal, position your router out in the open.
Step 2: Plugging In
Modem / Router
Provided by your ISP
7.
Threaded Antenna Posts
Netduma R2
Internet
Port
CAT-6 Ethernet Cable
A)
Screw the four antennas onto the threaded
antenna posts.
B)
For the best Wi-Fi performance, position
the antennas vertically.
A)
Turn off the Modem / Router provided by
your Internet Service Provider. (ISP).
B)
Connect one end of the Ethernet cable into
the
Internet Port
of the Netduma R2, which is
located on the rear of the router.
C)
Connect the other end of the Ethernet cable
to your ISP's Modem / Router.
Advertisement
Table of Contents
