Advertisement
INTRODUCTION
Proper system planning is vital in order to maximize the
device's performance and road safety. Plan your instal-
lation carefully to avoid compromising performance re-
liability of the system. Consult an authorized Blaupunkt
delaler for installation or reparation. Read the manual
carefullt before operating the device for the first time.
Safety Notes
Ensure to follow below safety notes during installation
and wiring connection: -
•
Disconnect the negative terminal of the battery. Refer
to the safety notes of the vehcle manufacturer.
•
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
•
Ensure cross section of the cable is no less than
2.5mm2 if the positive and negative cables are too
long.
•
Incorrect installation may result in malfunction of the
device or the car sound system.
Installation and Connection Instructions
•
Select a dry and well-ventilated location to install the
device.
•
The device must not be installed in overly exposed
location such on therear shelf, rear seat etc.
•
The installation location must be suitable for screw
holes and have stable ground support.
Integrated Fuse
The integrated fuse in the device protects the output
voltage and the entire electrical system in case of
malfunction. Do not replace damaged fuse with higher
current.
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
General Safety Notes
Observe the following to protect yourself against
injuries :
•
The supply voltage requirement is 12V DC with
grounded negative connection. Unauthorised dis-
mantling or modifying may void the warranty of the
device. Blaupunkt is not liable for any loss or damaged
caused or resulting from unauthorized reparation
or modification to the device. Refer to a Blaupunkt
specialist in case of any installation or reparation
required.
•
The device's core components may be damaged when
the car is driven on bumpy roads for a prolonged
period of time or if it is used to play non-standard
volume level.
•
Please do not operate the car radio under extreme
temperature conditions (extremely high temperature
or extremely low temperature); ensure the tempera-
ture within the car ranges from -10°C to 85°C (Storage
temperature : 5°C to 35°C) before connecting to the
power supply.
•
For abnormalities, please refer to TROUBLESHOOTING.
Consult a specialist if theproblem persist.
•
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care products may
contain materials which can damage the surface and
screen of the device. Use only dry or slightly moist-
ened cloth to clean the device.
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice.
1
INPUT FUNCTION
1
2
1.
2 Channel RCA Input Jack
2.
Gain Control
3.
Bass Boost Control
4.
LPF Control
5.
HPF/LPF/FLAT Control
6.
HPF Control
7.
POWER Indicator
8.
PROTECT Indicator
1
1.
2 Channel Speaker Output Connection
2.
Fuse (25Ax1)
3.
+12V Connection
4.
REM Control
5.
GND Control
3
4
5
6
7 8
2
3
4
5
2
Advertisement
