Advertisement
Quick Links
3-N-1 Gaming/Theater
Model # XLGTD50-1TC
This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your
needs. DO NOT discard any of the hardware or parts that you will not use on your set option, this
will give you the opportunity to use this TV Console for different configurations in case you decide
to upgrade your TV set in the future.
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, do not return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
www.whalenfurniture.com
ONLINE:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
VAS Furniture Mfg., Inc.
TM
8:30 a.m. - 4:30 p.m. PST, Monday - Friday
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
XLGTD50-1TC
LOT NUMBER:
DATE PURCHASED:
Console with Storage Drawer
parts@whalenfurniture.com
EMAIL:
Page 1
/
/
Factory # 56-12089
Advertisement
Summary of Contents for VAS XLGTD50-1TC
- Page 1 3-N-1 Gaming/Theater Console with Storage Drawer Model # XLGTD50-1TC This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any of the hardware or parts that you will not use on your set option, this will give you the opportunity to use this TV Console for different configurations in case you decide to upgrade your TV set in the future.
- Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: VAS Furniture CATALOG: 3-N-1 Gaming/Theater Console with Storage Drawer (XLGTD50-1TC) DATE OF MANUFACTURE: August, 2011 MADE IN CHINA MAXIMUM LOAD 15 lb.
- Page 3 Model # XLGTD50-1TC Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Top Shelf Frame w/Drawer (1) B- Middle Shelf Frame (1) C- Bottom Shelf Frame (1)
- Page 4 Model # XLGTD50-1TC Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. (2) 1/2” Bolt (3) 3/4” Bolt (1) Suction Cup (4) Lock Washer (5) Flat Washer (16+1 extra)
- Page 5 Model # XLGTD50-1TC Assembly Instructions Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make it easier during assembly of unit. Unpack the unit and confirm that you have all the hardware and required parts listed.
- Page 6 Model # XLGTD50-1TC Assembly Instructions Pick up Right Leg (F) and align the back inserted nuts with the end brackets on all Shelf Frames (A, B & C) simultaneously. Insert and screw the 3/4” Bolts (3) with Washers (4 & 5) through the end brackets into the Leg.
- Page 7 Model # XLGTD50-1TC Assembly Instructions Stand the unit upright. Go back and tighten all bolts with enclosed Allen Wrench. Adjust the Floor Levelers pre-attached at the bottom of both Legs (E and F) to level the unit. If you choose Table-top configuration, continue to STEP 9.
- Page 8 Model # XLGTD50-1TC Assembly Instructions for Table-top Attach Gaming Guitar Clip (O) and Cable Wheel (P) vertically onto the backside of Short Spine (D1). You can treat them as cable controls to help keep your entertainment center’s cables and cords organized The Gaming Guitar Clip (O) can provide storage of gaming guitar controllers when you attach it horizontally onto the backside of the Spine.
- Page 9 Model # XLGTD50-1TC Assembly Instructions for Table-top Put Suction Cups (1) firmly into the top holes of the Middle and Bottom Shelf Frame (B and C). Tip: If a suction cup resists insertion, try pressing down on the middle of the cup with the Allen Wrench while twisting it clockwise into the hole.
- Page 10 Model # XLGTD50-1TC Assembly Instructions for Table-top Position the assembled Table-top in your desired location against the wall. Now follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to mount the Tipping Restraint Hardware Kit to the Spine and the wall.
- Page 11 Model # XLGTD50-1TC A s s e m b l y I n s t r u c t i o n s f o r F l o a t i n g S w i v e l M o u n t Align and attach Swiveling Bracket (J) to the top of Long Spine (D) making sure the pivoting bolt head is up.
- Page 12 Model # XLGTD50-1TC Assembly Instructions for Floating Swivel Mount The Sensor/Sound Shelf (N) provides two options: position gaming accessories above TV or sound bar below TV. Choose the option you prefer, slide SSS Spine (M) onto the XYZ Mounting Frame (K) properly. Adjust the height of SSS Spine and attach in place. Make sure the Sensor/Sound Shelf (N) will not hit your TV.
- Page 13 Model # XLGTD50-1TC Assembly Instructions for Floating Swivel Mount Hold and attach the flat side of XYZ Mounting Frame (K) onto the Swiveling Bracket (J). Make sure the recess holes on the XYZ Mounting Frame are at the bottom. Flat Washer 1/2”...
- Page 14 Model # XLGTD50-1TC Assembly Instructions for Floating Swivel Mount Pick up Sensor/Sound Shelf (N) and securely fit the back tabs into the small slots of SSS Spine (M). Tighten both lock bolts pre-attached on the SSS Spine with a Phillips Screwdriver until they hit the back tabs of Sensor/Sound Shelf.
- Page 15 Model # XLGTD50-1TC Mounting Monitor Brackets to a television with a flat back Note: For televisions with a curved back or recessed back proceed directly to step #22. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded insert on the back of the TV.
- Page 16 Model # XLGTD50-1TC Mounting Monitor Brackets to a television with a curved / recess back Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to find the correct bolt consult a local hardware store.
- Page 17 Model # XLGTD50-1TC Assembly Instructions for Floating Swivel Mount MAKE SURE ALL BOLTS ARE TIGHT AND SPINE IS AT A 90 DEGREE ANGLE AND USING A QUALITY LEVEL TO VERIFY THE MOUNTING FRAME IS LEVEL PRIOR TO INSTALLATION OF TV.
- Page 18 Model # XLGTD50-1TC Assembly Instructions for Floating Swivel Mount The Monitor Brackets (LL/LR) can tilt up to 11˚ downward and 5˚ upward, depending on your optimum viewing position. Have your assistant hold the TV steady before you start to adjust the tilt. Simply reach behind the TV and turn the both Tilt Adjustment Knobs with enclosed 3/16”...
- Page 19 Model # XLGTD50-1TC Assembly Instructions Repeat steps 9 thru 13 to attach the Gaming Guitar Clip (O) and Cable Wheel (P) and install the Top Glass (G) and Glass Shelves (H and I) in place. Carefully move the console and position in your desired location against the wall. Now follow the instructions printed on the plastic bag containing Tipping Restraint Hardware Kit to mount the Tipping Restraint Hardware Kit to the Spine and the wall.
- Page 20 Model # XLGTD50-1TC The following steps are only for those who wish to mount their TV directly to the wall. If you have already mounted your TV to the Swinging Floater or plan to display your TV on the top surface of the stand, disregard the following steps.
- Page 21 Model # XLGTD50-1TC Assembly Instruction for installing XYZ Mounting Frame onto BRICK, SOLID CONCRETE OR CONCRETE BLOCK NOTE: If you are mounting your TV to a wall with wooden studs, skip this section. This assembly requires an electric drill and level (not included).
- Page 22 Model # XLGTD50-1TC Assembly Instructions The Sensor/Sound Shelf (N) provides two options: position gaming accessories above TV or sound bar below TV. Choose the option you prefer, slide SSS Spine (M) onto the XYZ Mounting Frame (K) properly. Adjust the height of SSS Spine and attach in place. Make sure the Sensor/Sound Shelf (N) will not hit your TV.
-
Page 23: Care And Maintenance
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every VAS Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.