Gigabyte H510M H User Manual page 32

& PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when Network Stack is enabled. (Default: 0)
& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack is enabled. (Default: 1)
ƒ NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
ƒ SATA And RST Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Specifies the operating mode of the integrated SATA controllers.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
AHCI
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 0/1/2/3
Enables or disables each SATA port. (Default: Enabled)
& SATA Port 0/1/2/3 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Configured as eSATA
Enables or disables support for external SATA devices.
ƒ Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
ƒ Miscellaneous
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Disables the selected lighting mode when the system is on.
Off
Enables the selected lighting mode when the system is on. (Default)
On
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
& CPU PCIe Link Speed
Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or
Gen 4 . Actual operation mode is subject to the hardware specification of each slot. Auto lets the BIOS
(Note)
automatically configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU that supports this feature.
PTT Technology. (Default: Disabled)
- 32 -