Table of Contents
Advertisement
Quick Links
Select-640 Timed SSDIP
PO Box 103, Saffron Walden, CB11 3GD, UK
Tel: +44 (0) 1799 551199
e-mail: info@camag.co.uk
Contents
Page
2
Quick-fit instructions
2
3
3
3
3
3
Operation - screen controls
4
5
5
5
5
Problems / errors
5
Maintenance
5
6
www.dosingsolutions.com
Advertisement
Table of Contents
Related Manuals for DS Select-640
Summary of Contents for DS Select-640
- Page 1 Select-640 Timed SSDIP Contents Page Quick-fit instructions Changing pump tubes Pump tube life Safety Accuracy Electrical supply Operation – screen controls Constant pumping Rotor Adjustment Encoding Installation Problems / errors Maintenance Power Resumption Spare parts and accessories PO Box 103, Saffron Walden, CB11 3GD, UK Tel: +44 (0) 1799 551199 e-mail: info@camag.co.uk...
- Page 2 Description The Select-640 Timed SSDIP is a dosing pump designed to give an initial dose of product, and then give subsequent doses of either the same or a different dosed at timed intervals. The size of the initial dose, the size of the timed dosages and the timed interval (in minutes) are all selected from the on- screen controls.
- Page 3 “Adjust %”. Electrical Supply The Select-640 SSDIP doser uses a 12V DC power supply. This can either be supplied from a 12V battery or via a transformer power supply from the mains electricity supply. A 5A maximum current power supply is recommended. The Select-640 SSDIP doser normally runs below 2A although starting currents are larger and dependant on the pumping conditions encountered.
- Page 4 It can also be used if a particular product needs to be dosed quickly within a given period. The following pumping rates will be achieved when the Select-640 SSDIP doser is set to “prime”:...
- Page 5 36 litres / hour Brown 4.92 litres / hour It is not recommended to use the Select-640 SSDIP doser for more than 2 hours at a time in the priming mode, as tube and motor life will be reduced. Rotor Adjustment The rotors in the Select-640 SSDIP pump-head are not adjustable.
- Page 6 Split tube Each 6 Months After disconnecting from electric supply, remove cover from Select-640 SSDIP doser and inspect interior of pump enclosure. Ensure no ingress of moisture or other contaminant. In case of difficulty, contact your supplier. Spare Parts and Accessories...
Need help?
Do you have a question about the Select-640 and is the answer not in the manual?
Questions and answers