Advertisement
0
=
e
or
0
0
Insert assembled tube (B) into base (A) and screw
on holder.
To achieve anti-clockwise to release the sliding
tube mechanism. Adjust to the required height
and tum twist lock clockwise to lock pole in position.
®
FOR LOUDSPEAKERS WITH KEYHOLE TYPE FIXING
Secure universal bracket(h)to upright pole
using screw(i). The speaker cable should
be threaded through pole and bracket as
shown in fig 3a. Or 3b.
Assemble thumbnut(t)washers(s )and M4
screw( q)as shown. Attach speaker - if
required tighten thumbnut. Install bracket
cover cap(k)if required.
FOR LOUDSPEAKERS WITH THREADED HOLE
Secure universal bracket(h)to upright
using screw(i). The speaker cable should be
Connected to the speaker and threaded
through the upright as shown in fig 3a or 3b.
The speaker should be fixed to bracket (h)
Using washer(r)and either screw(o) or (p)
depending on speaker type, Fit cover cap (k)
if required.
BOSE ACOUSTIMASS LOUDSPEAKERS
Attach universal bracket(h) to pole using screw (i)
Feed cable down pole as shown in fig 3a or 3b.
Attach loudspeaker to bracKet using screw (o) and
washers (r).
If required attach universal cover cap (k).
f..)
A
0
CAUTION
CAUTION!
Do not hang Large size
speakers from the brackets.
Avoid the risk of instability
of the center of gravity !
f..)
B
LOCK
X
Advertisement
