Carlon PTC Series Programming Manual

Carlon PTC Series Programming Manual

Timer controller

Advertisement

Quick Links

PROGRAMMING
MANUAL
PTC SERIES
PTC2001 - PTC2004
Timer Controller
05/15
Leaders in water measurement and control
CARLON METER, INC. • PRODUCT WARRANTY
Carlon Meter, Inc.(hereinafter Carlon or "the company") warrants products of its manufacture to be free of
1710 Eaton Drive
defects in material or workmanship. Liability under this warranty extends for twelve (12) months from the
date of purchase. Liability is limited to repair or replacement of any failed product or assembly proven to be
Grand Haven, MI 49417
defective in material or workmanship upon manufacturer's examination. Removal and installation costs are
not included under this warranty. Manufacturer's liability shall never exceed selling price of the meter or
assembly in question. Carlon disclaims all liability for damage its products caused as the result of improper
installation, maintenance, use or attempts to operate products beyond their intended functionality,
Ph: (616) 842-0420
intentionally or otherwise. Carlon is not responsible for damages, injuries or expenses incurred through the
use of its products. The above warranty is in lieu of all other warranties, either expressed or implied. No
Fax: (616) 842-1265
agent of the company is authorized to alter or otherwise revise this warranty.
E-mail:
carlon@carlonmeter.com
Website: www.carlonmeter.com
For complete specs visit our website:
www.carlonmeter.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTC Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Carlon PTC Series

  • Page 1 Manufacturer’s liability shall never exceed selling price of the meter or assembly in question. Carlon disclaims all liability for damage its products caused as the result of improper installation, maintenance, use or attempts to operate products beyond their intended functionality, Ph: (616) 842-0420 intentionally or otherwise.
  • Page 2 PTC2001 - PTC2004 TIMER CONTROLLER PROGRAMMING Connect power to the Timer Controller and turn unit on with switch in upper right hand corner The LCD Display has three display modes – Power Up, Timer, and Totalizer. Totalizer Mode - Displays total input counts received (switch closures) Power Up Mode - This mode displays support parameters (serial #, phone #, mgf.

This manual is also suitable for:

Ptc2001Ptc2004

Table of Contents