Escient FireBall FP-1 Quick Setup Manual

FP-1 Music Manager
With Universal Dock for iPod

GETTING STARTED

SYSTEM REQUIREMENTS:
A) Broadband Internet access for product updates,
cover art lookup, and product registration.
B) One of the following iPod models or other iPod that
supports Apple's Universal Dock Connector:
- iPod nano 1st generation
- iPod nano 2nd generation (aluminum)
- iPod mini
- iPod with color display
- iPod with video
C) Appropriate Universal Dock iPod Adapter
(not included with the FP-1)
D) TV or A/V receiver with video display
1
Unpack Your New FireBall FP-1
• FireBall FP-1
• Handheld Remote
• Two AAA batteries
• Ethernet Cable
• 3 Wire Audio/Video Cable
• Power Adapter
• Escient Software and User's Manual CD-Rom
• This Quick Setup Guide
A) Install the two AAA batteries into the remote
B) Make note of the serial number
(located on the back)
SERIAL NUMBER:______________________________
Quick Setup
2
Connect the FireBall FP-1 to your TV or A/V Receiver
A) Locate the included three wire composite video (yellow) and analog
audio (white and red) cable.
B) Connect the LEFT and RIGHT audio connectors (white and red) to the
ANALOG AUDIO OUT jacks on the back of the FP-1. Connect the
video connector (yellow) to the Composite VIDEO OUT jack on the
back of the FP-1.
C) Connect the other end of the cable to an available set of ANALOG
AUDIO IN and COMPOSITE VIDEO IN jacks on the back of your TV
or A/V Receiver.
Note: You may use optional s-video cables and optical digital audio cables
for the best picture and sound quality. Contact your Escient dealer for more
information.
AUDIO VIDEO INPUTS on A/V RECEIVER OR TV
HOME NETWORK (LAN)
3
Connect the FireBall FP-1 to Your Home Network
Note: The FP-1 requires a home network and Internet connection to
download and display cover art, browse and play music from a
FireBall server, play Internet radio stations, and for general
maintenanace.
A) Connect the included ethernet cable from FireBall's
ethernet jack to an open port on your Ethernet router.
Note: If you want to connect your FireBall FP-1 to a wireless network
you will need to purchase an optional Ethernet to Wireless Bridge.
Please contact your Escient dealer for more information.
Escient
6640 Intech Blvd., Indianapolis, Indiana 46278
Phone: 800-372-4368 Press "3" For Support
Hours: Monday - Friday 9:00am - 7pm EST
Fax: 317-616-6790
www.escient.com
Email: support@escient.com
Document Number: M51002-01A2
November 2006
POWER ADAPTER
4
Power Up the FP-1
A) Connect the included Power Adapter to the FP-1.
B) Connect the Power Adapter to an AC outlet.
Action: The Standby LED on the front of the FireBall will begin to
flash RED during the power on cycle. When the LED turns solid RED,
the FireBall is ready for use. Press the power button on the front panel
or on the remote control. The LED will turn solid GREEN and video
will be displayed on the TV when the unit is on.
Note: You may have to press the "FB1" button on the remote to
configure it to control FireBall. Also be sure the TV or A/V receiver are
turned on and set to the correct input.
5
QuickStart and Product Registration
A) Use the remote control and follow the on-screen instructions.
MORE SETUP 