Using The Appliance; Before Use; To Start The Appliance; Controlling The Temperature, Setting - Electrolux EFR 0563C Instruction Book

Hide thumbs Also See for EFR 0563C:
Table of Contents

Advertisement

Using the Appliance

Before Use

Remove all securing tapes.
Wash the inside of the appliance with lukewarm water
with a little bicarbonate of soda added (5 ml to 0,5 litre
of water). Do not use soap or detergent as the smell
may linger. Dry the appliance thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or products containing alcohol.
F F

To Start the Appliance

1. Allow the appliance to stand for 2 hrs after
installation.
2. Plug in the appliance and switch on at the mains
supply.
3. Turn the thermostat control knob to the required
setting. A setting of 4 is usually suitable for normal
operation (see thermostat control).
4. Leave the appliance for approximately 4 hours for
the correct temperature to be reached before
placing food inside.

Controlling the temperature, setting

The thermostatic controller interrupts the operation of
the appliance automatically for more or less time
depending on the setting then restarts it assuring the
required temperature.
Turning the control button towards the bigger numbers
cooling becomes more and more intensive.
In the ice-making compartment can be reached -2 °C
or lower temperature if the knob of the thermostatic
control is set according to following table:
Ambient temperature
from 10 °C to 16 °C
from 16 °C to 25 °C
from 25 °C to 32 °C
from 32 °C to 38 °C
In this case the temperature starting automatically in
the fresh food compartment is about +5 °C or below.
The setting 5., 6. and 7. are suitable for quick chill of
big quantity goods.
The temperature coming about in the refrigerator is
effected by not only the position of the thermostatic
control but the ambient temperature, frequency of
door openings and the quantity of food put into it
newly etc.
In the maximum i.e. „7” position - in case of
increased demand e.g. during heatwaves -
without disconnecting continuous operation can
occur. This does not cause damages to the appliance.
6
All manuals and user guides at all-guides.com
Thermostat setting
„1”
„1-2”
„2-3”
„3-4”

Advertisement

Table of Contents
loading

Table of Contents