Page 1
Water Dispenser with Stainless Steel Look Distributeur d’eau avec apparence d’acier inoxydable Dosificador de agua con apariencia de acero inoxidable Use & Care Guide Guide d’utilisation et d’entretien Manual d uso y cuidado VWD5976BL CAUTION: Before using water MISE EN GARDE: Avant PRECAUCIÓN: Antes de usar el dispenser, read this manual and d'employer votre distributeur...
Thank you for purchasing a vitapur ® Water Dispenser. Please read the enclosed operating instructions carefully and retain this booklet for future reference. We have carefully engineered your vitapur ® Water Dispenser to give you years of enjoyment and trouble free operation.
YOUR VITAPUR ® WATER DISPENSER Bottle support collar Ready-To-Dispense indicator lights: Red: “flashing” Heater is in operation "on” The hot water has reached its optimum temperature and is ready for dispensing Blue: "on" The cold water has reached its optimum...
Page 4
OPERATING INSTRUCTIONS Initial Product Cleaning Procedure As with most new appliances, it is recommended to clean the reservoir prior to first time use. 1. Make sure the unit is unplugged and power switch is turned off. Figure A 2. Remove the bottle support collar, saturate a clean cloth with water dispenser cleaner or vinegar and wipe the inside of the reservoir.
Page 5
IMPORTANT NOTICE ABOUT LEAKING BOTTLES If you find that your dispenser is leaking, check the water bottle first! Almost all 3 and 5 gallon water bottles are recycled, and handled extensively during cleaning, filling, and shipping. As a result they are very prone to developing pin holes or small cracks that can cause an overflow (or leak) when placed on top of a water dispenser.
Dispensing Hot Water This water dispenser has a power saving Insta-HOT Feature button which activates the water heater only when pressed, so you get hot water on demand without the cost of constantly heating water! To dispense hot water, first press the Insta-HOT Feature activation button. The red indicator light will begin flashing to indicate that the water heater is on and active.
Page 7
Cleaning the Condenser Vacuum or sweep away the dust from the condenser coils at the back of the dispenser. For best results, you can purchase Condenser a brush designed specifically for this purpose from your coils local appliance store. This will improve cooling and efficiency. Draining the Reservoirs Drain the reservoirs before and after cleaning, when going on long vacations or if not using the dispenser for long periods of time.
WARNING: The Water Dispenser SPECIFICATIONS heats and dispenses water to 194˚F / 90˚C which can cause severe VWD5976BL burns or scalding. Output per hr: 1.2 gal / 4.6 L Cold 0.5 gal / 2.0 L DO NOT ALLOW CHILDREN TO USE Internal Tank: 0.2 gal / 0.6 L THE HOT WATER DISPENSING...
The cold water has reached its optimum temperature and is ready for dispensing Q: What is the spike that goes into the bottle? A: vitapur ® water dispensers feature a “piercing valve” as part of the bottle support collar, providing added convenience for water bottle installation.
Need help?
Do you have a question about the Classic Series and is the answer not in the manual?
Questions and answers