Advertisement
2.
INTRODUCTION & SPECIFICATION
3.
PREPARING DRILL FOR USE
3.1.
Air Supply
F WARNING!
3.2.
Couplings
fig. 1
4.
OPERATING INSTRUCTIONS
F
WARNING! Ensure you read, understand and apply safety instructions before use.
4.1
DRILL BIT FITTING.
p
F
WARNING! Unplug from the air supply before placing bit into chuck.
p
F WARNING! Ensure you remove the chuck key before starting the drill.
4.2.
DO NOT
4.3.
STANDARD DRILLING INSTRUCTIONS.
F
WARNING! Ensure you wear approved safety goggles and any other safety items required for the job.
Remove the chuck key before using the drill. Also ensure that all other safety requirements are followed.
p
F
tendency to grab and kick in the opposite direction which could cause loss of control. If you are not
p
prepared, this loss of control can result in damage and/or personal injury.
F
p
fig. 2
fig 3
WARNING! Be prepared for drill binding or break through. When these situations occur the drill has a
5.
MAINTENANCE
WARNING! Disconnect drill from air supply before changing drill bit, servicing or performing maintenance.
Use genuine parts only. Unauthorised parts may be dangerous and will
invalidate the warranty.
a)
b)
Declaration of Conformity
REVERSIBLE 3/8” AIR DRILL
Model: SA24
For Jack Sealey Ltd. Sole importer into the UK
of Sealey Power Tools.
Advertisement
