Advertisement
Quick Links
Dallas - 2 Door Mirrored Wardrobe
Assembly Instructions
Dimensions
Width - 68.1cms
Depth - 50cms
Height - 199.5cms
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call Customer Helpline 0844 880 6770
Please keep for future reference
-
KA3281/02
Advertisement
Summary of Contents for Dallas KA3281/02
- Page 1 Dallas - 2 Door Mirrored Wardrobe Assembly Instructions KA3281/02 Please keep for future reference Dimensions Width - 68.1cms Depth - 50cms Height - 199.5cms Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call Customer Helpline 0844 880 6770...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the Do not stand or put weight on We do not components and tools listed on the product, this could cause recommend the pages 2, 3 and 4.
- Page 3 Components - Panels - Exploded View Please check you have all the panels listed below Plan view of panels on page 4 If you have damaged or missing components, Components - Fittings call the Customer Helpline 0844 880 6770 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
- Page 4 Components - Panels - Plan View Please check you have all the panels listed below (68.1 x 50cm) Shelf (65 x 33cm) Back rail (65 x 8.7cm) Left side Right side (198 x 47cm) (198 x 47cm) Plinths x 2 (65 x 8.7cm) Base (65 x 46.6cm)
- Page 5 Assembly Instructions Step 1 Fitting metal dowels Screw metal dowels into left hand side 8 mm Note: Insert metal dowels as far as shown. Do not over tighten. Fitting wooden dowels DO FIRST Knock wooden dowels into holes to required depth (see illustration) SECOND Fitting hanging rail socket...
- Page 6 Assembly Instructions Step 3 Fitting metal cams Press metal cams firmly into holes in the base and shelf Fitting door stops Screw in door stops into holes in the top Front edge Step 4 Fitting wooden dowels Knock wooden dowels into holes in the plinths to required depth (see illustration)
- Page 7 Assembly Instructions Step 5 Cam lock in open Cam lock in closed position position Attaching panels Position shelf and left side Front edge and secure by turning cam locks clockwise Do not over tighten. Position back rail onto left side and secure with a 50mm screw Do not over tighten.
-
Page 8: Important Note
Assembly Instructions Step 7 Attaching panels Secure plinths to the left side using two 50mm screws Do not over tighten. Front edge Attaching panels Important note: Plinths must be supported until next step Plinths must be supported until next step Step 8 Attaching panels Secure right side... - Page 9 Assembly Instructions Step 9 Attaching panels Secure top to left right sides using four 50mm screws Do not over tighten. Step 10 Back of unit Important note: Two people required to turn unit over Square up unit Using a tape measure, ensure the distance from top left corner to bottom right...
- Page 10 Assembly Instructions BACK OF Step 11 DOOR Attaching door hinges Attach hinge and plate onto door using 15mm screws Repeat for the other door Step 12 Important note: Two people required to stand unit upright Important note: Two people required to position doors Hanging doors Position the door hinge and...
- Page 11 Assembly Instructions Step 13 Aligning doors To move doors up and down: loosen screws shown and adjust to suit, once doors are aligned re-tighten screws To move doors side to side: loosen screw shown and adjust to aligned To move in and out: loosen screw shown and adjust to aligned and re-tighten screws...
- Page 12 Assembly Instructions Step 14 Attaching door handles Fix handles to door using 22mm bolts (Illustration shown without right hand door) Important note: It is essential that this product is fixed to a wall using the bracket supplied Fixing Safety bracket Postion safety bracket centrally on the back edge of the top...
-
Page 13: Customer Helpline
Customer helpline Address: Support Desk, KD Products Ltd, Redwither Tower, Wrexham Industrial Estate, Wrexham, LL13 9XT Tel: 0844 880 6770 e-mail: helpline@kdproducts.co.uk Dallas 2 Door Mirrored Robe Code : A3282B Alaska Birch / Wisconsin Walnut A3281WW Thank you for your purchase!!! In the unlikely event that this product has missing or damaged parts, please fill in the form below and send it to the address above, fax to 01978 661848, or e-mail it to helpline@kdproducts.co.uk.