Advertisement
Quick Links
Dressing Table
Assembly Instructions -
Dimensions
:
Width
101.2 cm
Depth
:
40.0 cm
:
Height
76.0 cm
Assembly Instructions -
If you need help or have damaged or missing parts, please contact Your retailer
350835
Please keep for future reference
Please keep for future reference
White
1040401
Black
1040420
Soft grey 1040452
Issue 1 - 09-11-2016
Advertisement
Related Manuals for Florence 1040401
Summary of Contents for Florence 1040401
- Page 1 Dressing Table Assembly Instructions - White 1040401 Please keep for future reference Black 1040420 Soft grey 1040452 Dimensions Width 101.2 cm Depth 40.0 cm Height 76.0 cm Assembly Instructions - Please keep for future reference If you need help or have damaged or missing parts, please contact Your retailer...
- Page 2 ! Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • Do not stand or put weight on components and tools listed on the product, this could cause pages 2 and 3. damage.
- Page 3 Components - Panels Please check you have all the panels listed below (101,2 cm x 40 cm) Side, right (15 cm x 30,6 cm) Side, left (15 cm x 30,6 cm) Leg, right (74,5 cm x 5,0 cm) Leg, left (74,5 cm x 5,0 cm) Back rail (88,2 cm x 15 cm)
- Page 4 Components - Fittings Please check you have all the panels listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. ø8 x 40mm Wooden dowel x ø6 x 30mm Wooden dowel x 12 ø3 x 12mm Screw x ø3 x 35mm Screw x...
- Page 5 Assembly Instructions Step 1 Assembly of the table. Step 1.1 Knock the dowels ø8 x 40mm Wooden dowel x into the holes indicated on the sides using a small hammer. Step 1.2 Screw the bolts into ø5 x 11, cc34mm Bolt x 8 the holes indicated on the legs Step 1.3...
- Page 6 Assembly Instructions Step 1.4 Screw the bolts into ø5 x 11, cc34mm Bolt x 6 the holes indicated on the sides Step 1.5 Place the spacers ø18 x 9mm Spacer x ø5.8 x 19mm Screw x as shown, and fix the upper drawer runners to the sides using screws...
- Page 7 Assembly Instructions Step 1.6 Knock the dowels into ø8 x 40mm Wooden dowel x the holes indicated on the back rail and the front rail using a small hammer. Step 1.7 Knock the dowels into ø8 x 40mm Wooden dowel x the holes indicated on the dividers using a...
- Page 8 Assembly Instructions Step 1.9 Screw the bolts into ø5 x 11, cc34mm Bolt x 8 the holes indicated on the Step 1.10 Place the dividers ø15 x 10.5mm Cam x 4 onto the top Push cams into the holes indicated on the dividers , arrows pointing towards...
- Page 9 Assembly Instructions Step 1.12 Place the sides ø15 x 10.5mm Cam x 4 onto the top Push cams into the holes indicated on the sides Arrows pointing towards the top Turn the cams to the right to fix the top Step 1.13 Fix the back rail ø5 x 38mm Screw x...
- Page 10 Assembly Instructions Step 1.15 Place the dressing table up against the wall. Draw a line as shown using a pencil. Step 1.16 Fix the strap to the wall 140mm below the line as shown. 140 mm Note! See next page for information on how to fix the strap to the wall.
-
Page 11: Care And Maintenance
A Guide to Wall Mounting & Fixings IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. HINTS: 1) General Rule Always use a larger screw and wall plug if you are not sure. - Page 12 Assembly Instructions Step 2 Assembly of the drawers. Step 2.1 Fix the drawer sides ø3 x 35mm Screw x to the drawer back shown, using screws Step 2.2 Knock the dowels ø6 x 30mm Wooden dowel x 12 into the holes indicated on the drawer sides using a smal hammer.
- Page 13 Assembly Instructions Step 2.6 Important! ø3 x 12mm Screw x Back fitting w. ø3.5 x 15mm Screw x Make sure the angle between the drawer front the drawer sides is 90° 300mm Drawer runner, left x 300mm Drawer runner, right x before the drawer bottom is fixed using shown.
- Page 14 Assembly Instructions Step 2.9 Remove the paper on the WARNING! back of the Warning label and place it inside the IN ORDER TO PREVENT OVERTURNING middle drawer as shown. THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED Serious or fatal crushing injuries can occur from furniture tipping over.