Armitron YP12598 Instruction Manual

FEATURES
• Time Telling Mode (Hours, Minutes, Seconds, Month, Date, and Day
of the Week)
• 100 Year Calendar
• (5) 24 Hour Alarms
• Hourly Chime: One 'Beep' sound every full Hour
• Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a sec-
ond with Lap Operation
• Countdown Timer
• Second Time Zone
• Pacer
• 12/24 Hour (Military Time)
• Water Resistant as indicated on the watch
• INSTALITE - Electro Luminescent Display
EL LIGHT FEATURE
1. Press 'D' in any mode to illuminate the watch face. The backlight will
remain lit for 3 seconds.
NOTE: Excessive use of the light will shorten battery life.
12/24 HOUR (MILITARY) TIME
From Time Telling Mode, press 'C' to set either 12 Hour Time or 24 Hour
(Military) time.
SELECTING FEATURES
1. Time Telling Mode displays Hours, Minutes, Seconds, Month, Date, and
Day of the Week.
2. From Time Telling Mode, press 'B' once. Chronograph appears. Press
'B' five times to return to Time Telling Mode.
3. From Time Telling Mode, press 'B' twice. Countdown Timer Mode ap-
pears. Press 'B' four times to return to Time Telling Mode.
4. From Time Telling Mode, press 'B' three times. Alarm Mode appears.
Press 'B' three times to return to Time Telling Mode.
5. From Time Telling Mode, press 'B' four times. Second Time Zone Mode
appears. Press 'B' once to return to Time Telling Mode.
SETTING THE TIME AND CALENDAR
ANALOG
1. Carefully pull the Crown ('E') out all the way and tum in either direction
until the desired time Is displayed.
2. Carefully push the Crown back in all the way to resume time keeping.
DIGITAL
1. From Time Telling Mode, press and hold 'A'. Seconds flash. Press 'C' to
zero out the seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to
time.
2. Press 'B'. Hours flash. Press 'C' to advance the Hours.
NOTE: Pressing and holding 'C' will advance digits rapidly. When 12 Hour
Format is selected, 'PM' indicates 'p.m.' times; there is no indicator for
'a.m.' times.
3. Press 'B'. Minutes flash. Press 'C' to advance the Minutes.
4. Press 'B'. The Year flashes. Press 'C' to advance the Year.
5. Press 'B'. Months Flash. Press 'C' to advance the Month.
6. Press 'B'. The Day flashes. Press 'C' to advance the Day.
7. Press 'A' to end set sequence and return to Time Telling Mode.
STOPWATCH
1. From Time Telling Mode, press 'B' once to enter the Stopwatch Mode.
2. Press 'C' to start timing.
3. Press 'C' again to stop timing.
4. Press 'A' to reset to zero.
5. Press 'B' to return to Time Telling Mode.
INSTRUCTIONS MANUAL
SPLIT TIME
1. While in the Stopwatch Mode, press 'C' to start timing
2. Press 'A' to measure and display the Split Times.
3. Press 'C' to stop timing at the end of the event.
4. Press 'A' to reveal the final Split Time.
5. Press 'A' again to reset to zero.
6. Press 'B' to return to Time Telling Mode.
SETTING THE 24 HOUR ALARMS
1. From Time Telling Mode, press 'B' three times to enter the Alarm Mode
2. Press 'C' to select the Alarm number: Alarm 1 through Alarm 5.
NOTE: The process to set Alarms 1 through 5 is the same.
3. Press 'A'. Alarm Hours flash. Press 'C'1o advance the Alarm Hour.
4. Press 'B'. Alarm Minutes flash. Press 'C' to advance the Alarm Minute.
5. Press 'A' to end set sequence.
6. Press 'B' to return to Time Telling Mode.
ACTIVATING ALARM + HOURLY CHIME
1. While in Alarm Mode, press 'C' to activate the Hourly Chime. The Hourly
Chime Symbol appears to indicate that the Hourly Chime will sound every
hour on the hour.
2. Press 'C' again to deactivate the Hourly Chime.
3. Press 'D' again to deactivate the Alarm (1-5).
4. Press 'C' to activate the selected Alarm. The Alarm Symbol appears to
indicate the Alarm will sound at the preset Alarm Time for about 60 sec-
onds or until any button Is pressed.
5. Press 'C' again to deactivate the Alarm.
6. Press 'B' three times to return to Time Telling Mode.
COUNTDOWN TIMER
1. From Time Telling Mode, press 'B' twice to enter the Timer Mode.
2. Press and hold 'A'. Hours flash. Press 'C' to adjust the Hour.
3. Press 'B'. Minutes flash. Press 'C' to adjust the Minutes.
4. Press 'B'. Seconds flash. Press 'C' to adjust the Seconds.
5. When the Countdown Timer is set, press 'A' to end set sequence and
return to Timer Mode.
6. Press 'C' to start the Countdown Timer.
7. If desired, press 'C' to stop the Countdown Timer. Press 'C' again to
resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until 'C' is
pressed. When the Timer has expired, the alarm will sound for about 60
seconds or until any button is pressed.
8. Press 'C' to stop the Timer.
9. Press 'B' to return to Time Telling Mode.
PACER
1. From Time Telling Mode, press 'B' four times. Pacer Mode appears.
2. Press 'A' to select the tempo in tile following sequence: 10-20-30-40-60
-80-120-160 -240-320.
3. Press 'C' to start the Pacer.
4. Press 'C' again to stop the Pacer.
5. Press 'B' to return to Time Telling Mode.
YP12598