Table of Contents
Advertisement
3
Installing a jumper on the master/slave select terminal
Connect a jumper to the rear side of the COMBO.
If the jumper is connected to MA (Master), it will work in the Master mode.
If the jumper is connected to SL (Slave), it will work in the Slave mode.
If the jumper is connected to CS (CSEL), you can control the device by using
the host interface signal CSEL. (In general, connection to MA is recommended.)
CS : Cable Select(CSEL)
SL : Slave
MA : Master
4
Connecting the audio cable from a sound card
Connect the 4-pin audio cable between the sound output terminal on the
COMBO drive and the audio input terminal on the sound card.
For clearer sound, use a digital output terminal.
(Available only for the CAID that supports digital output)
This may not be available for general sound cards.
Sound Output Terminal
Digital Output Terminal
8
Installing the CD Record Utility
To record data on a CD-R or CD-RW disc in the COMBO drive, you must first
install the CD record utility. For compatibility reasons, you are recommended to
uninstall any existing software of the same type before installing this utility.
1
Insert the disc supplied with the COMBO drive in the drive.
2
Follow the instructions displayed on the screen to install the utility.
Refer to the separate utility documentation for further details.
3
Store the utility disc in a safe place.
Installing the Device Driver
No additional device driver is needed for Windows 98/2000/ME/XP/NT4.0, as the
default Windows device driver is used. You can check that the COMBO drive has
been correctly detected by Windows. To do so, proceed as follows.
1
Double-click on the My Computer icon on your desktop.
2
Double-click on the Control Panel folder.
3
Double-click on the System icon.
4
Click on the Device Manager tab.
Sound Card
5
Expand the CD-ROM branch.
The SAMSUNG COMBO SM - *** device name is displayed.
The SAMSUNG device driver enables discs in the COMBO drive to be read but not
recorded in an MS-DOS environment;
the driver is located in the D driver folder on the CD record utility disc.
Audio Input Terminal
of the Sound Card
9
Advertisement
Table of Contents
