1. Manuals
  2. Brands
  3. Pipeline Manuals
  4. Enclosure
  5. P-DR1W-48
  6. Owner's manual

Pipeline P-DR1W-48 Owner's Manual

Shower enclosures
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-DR1W-48 | P-DR1W-60
OWNER'S MANUAL
SHOWER ENCLOSURES
2 PEOPLE REQUIRED
IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE
SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS.
P001
06.10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-DR1W-48 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pipeline P-DR1W-48

  • Page 1 P-DR1W-48 | P-DR1W-60 OWNER’S MANUAL SHOWER ENCLOSURES 2 PEOPLE REQUIRED P001 IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS. 06.10...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PANNEAU FIXE FIXED PANEL PARTS LISTING ............3 PROVIDED HARDWARE ..........4 GLASS PANEL DIMENSIONS .......... 4 REQUIRED TOOLS AND MATERIALS ......... 4 GASKET INSTALLATION..........5 RUNNING RAIL............6 GLASS HOLDERS ............7 GLASS CLIPS ............7 FIXED PANEL PLACEMENT ...........

  • Page 3: Parts Listing

    PARTS LISTING ITEM PARTS RUNNING RAIL WALL BRACKET STOPPERS GLASS HOLDERS TWIN ROLLERS 2 PAIRS SLIDING DOOR PANEL FIXED PANEL STRAIGHT HANDLE GASKET (DOOR) GASKET (FIXED PANEL) BOTTOM GLASS CLIP GASKET (GLASS CLIP) BOTTOM GUIDE GASKET (BOTTOM GUIDE) THRESHOLD DOOR PANEL SIDE GASKET DOOR PANEL BOTTOM GASKET...
  • Page 4 HARDWARE ITEM HARDWARE #12-3 SELF-THREADING SCREW #6-1 SELF-THREADING SCREW HEX KEY 3mm HEX KEY 6mm (7/32˝) TOOLS HACKSAW SCREWDRIVERS DRILL 1/4˝& 1/8˝ DRILL BITS SILICONE If the shower panels are to be assembled on ceramic tiles, use a 1/4˝ drill bit for ceramic tiles. PENCIL CUTTING PLIER TAPE MEASURE...

  • Page 5: Gasket Installation

    GASKET INSTALLATION Using the cardboard packaging box as platform, install bottom door gasket (17) onto door panel (6) using a block and a mallet. Notice the gasket orientation. INTERIOR SHOWER SIDE Place door panel (6) inside tub to simplify following installation procedures.

  • Page 6: Running Rail

    RUNNING RAIL Position the stoppers (3) on the running rail (1) as illustrated. Secure them temporarily in place. Position the wall brackets (2) on the running rail (1) as illustrated. Secure them temporarily in place.

  • Page 7: Glass Holders

    GLASS HOLDERS Fasten the running rail (1) to the xed panel (7) with the glass holders (4). Secure them temporarily in place. Ensure that the running rail (1) is at the highest pos- sible position in reference to the holes of the xed panel (7).

  • Page 8: Fixed Panel Placement

    FIXED PANEL PLACEMEMENT The bottom guide (13) can hang o the threshold (B) as long as it can be well-fastened. Position the xed panel assembly (7) on thresh- old of base (B) as shown . INTERIOR SHOWER SIDE Adjust the xed panel (7), by way of the running rail (1), so as to force the gasket (10) against the wall.

  • Page 9: Threshold

    CONTINUED (2) on the walls on both sides of shower as well as the placement of the bottom glass clips (11) (13). THRESHOLD Remove the xed panel assembly so as to allow placement of the threshold (15) onto the base. Ensure that a bead of silicone (S) is applied to the underside of the threshold before installing.

  • Page 10: Wall Brackets

    WALL BRACKETS Mark the screw locations on the walls on both sides of shower. Remove the running rail (1) l l i s l l until wall stud is reached with a drill bit intended for ceramic tiles. WALL STUD Fasten the wall brackets (2) with #12-3 (18).

  • Page 11: Sliding Door

    SLIDING DOOR Assemble the 2 top rollers (5) to the door panel (6) as illustrated. INTERIOR SHOWER SIDE Install sliding door (6) ensuring that rollers (5) are xed over the running rail (1). Ensure that sliding door (6) is placed within the bottom guide (13).
  • Page 12 CONTINUED WASHER Install bottom rollers, making sure that they are tangent to the running rail (1). Through the use of the nonconcentric washers, adjust rollers so that the sliding door panel is parallel to the running rail. GLASS HOLE WASHER HANDLE See sheet for installation and install the handle as shown.

  • Page 13: Gaskets Installation

    GASKETS INSTALLATION Thoroughly clean the edge of the sliding door, closest to the side where the handle is located. Apply the door gasket (9) to this edge of the slid- ing door (6). INTERIOR SHOWER SIDE Install door side gasket (16) onto sliding door panel (6).

  • Page 14: Stoppers

    STOPPERS DOOR CLOSED Ajuster le positionnement des butoirs (3) a n d’obtenir une ouverture ainsi qu’une fermeture optimale de la porte coulissante. Assurer que le joint de rétention (9) de la porte coulissante s’écrase contre le mur. Adjust the position of the stoppers (3) so as to ensure a maximum opening and closing range.
  • Page 15 P-DR1W-72 OWNER’S MANUAL SHOWER ENCLOSURES 2 PEOPLE REQUIRED IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE P002 SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS. 07.08...
  • Page 16 TABLE OF CONTENTS PANNEAU FIXE FIXED PANEL PARTS LISTING ............3 GLASS PANEL DIMENSIONS .......... 4 PROVIDED HARDWARE ..........4 REQUIRED TOOLS AND MATERIALS ......... 4 GASKET INSTALLATION..........5 RUNNING RAIL............6 GLASS HOLDERS ............7 BOTTOM GLASS CLIPS..........7 FIXED PANEL PLACEMENT ...........

  • Page 17: Parts Listing

    PARTS LISTING ITEM PARTS Running rail Wall bracket for running rail Set of double rollers Door stopper Door panel Wide Fixed panel Narrow Fixed panel Straight handle Fixed panel gasket Door bottom gasket Door side gasket Bottom center guide Gasket (Glass Clip + Bottom Guide)
  • Page 18 HARDWARE ITEM HARDWARE #12-3 SELF-THREADING SCREW #6-1 SELF-THREADING SCREW HEX KEY 3mm HEX KEY 6mm (7/32˝) TOOLS HACKSAW SCREWDRIVERS DRILL 1/4˝& 1/8˝ DRILL BITS SILICONE If the shower panels are to be assembled on ceramic tiles, use a 1/4˝ drill bit for ceramic tiles. PENCIL CUTTING PLIER TAPE MEASURE...

  • Page 19: Gasket Installation

    GASKET INSTALLATION Using the cardboard packaging box as platform, install bottom door gasket (11) onto door panel (6) using a block and a mallet. Notice the gasket orientation. INTERIOR SHOWER SIDE Place door panel (6) inside tub to simplify following installation procedures.

  • Page 20: Running Rail

    RUNNING RAIL Position the stoppers (4) on the running rail (1) as illustrated. Secure them temporarily in place. Position the wall brackets (2) on the running rail (1) as illustrated. Secure them temporarily in place.

  • Page 21: Glass Holders

    GLASS HOLDERS xed panel (7) with the glass holders (4). Secure them temporarily in place. Ensure that the running rail (1) is at the highest pos- sible position in reference to the holes of the xed large panel (7). GLASS HOLE WASHER BOTTOM GLASS CLIPS Insert gaskets (16) in the glass clip (14) and...

  • Page 22: Fixed Panel Placement

    FIXED PANEL PLACEMEMENT The bottom guide (13) can hang o the threshold (B) as long as it can be well-fastened. INTERIOR Position the xed panel assembly (7) on SHOWER SIDE threshold of base (B) as shown. Adjust the wall brackets so as to ensure that they are pressed up against the walls.
  • Page 23 CONTINUED Mark the screw locations for the wall brack- ets (2) on the walls on both sides of shower as well as the placement the glass clip (14) and bottom center guide (15). SEUIL DE RÉTENTION Remove the wide xed panel assembly (7) so as to allow placement of the threshold (13) onto the base.

  • Page 24: Wall Brackets

    WALL BRACKETS Remove running rail (1) from wall brackets (2). Drill holes in walls with a drill bit, intended for ceramic tiles, through to the wall stud. WALL STUD Fasten the wall brackets (2) with #12-3 (17). Insert large xed panel (7) back, ensuring that it’s placed in the glass clip (14) and bottom center guide (15).

  • Page 25: Small Fixed Panel Installation

    SMALL FIXED PANEL INSTALLATION 1 1/2” Insert the bottom bottom glass clip (14) over the INTERIOR (38 mm) SHOWER SIDE threshold (13), ensuring that the prescribed distance from the wall is respected. Screw down and insert the gasket (16). Place small xed panel (8) within bottom glass clip (14).

  • Page 26: Door Panel

    DOOR PANEL Assemble the 2 top rollers (3) to the door panel (6) as illustrated. INTERIOR SHOWER SIDE Install sliding door (6) ensuring that rollers (3) are positioned over the running rail (1). Ensure that sliding door (6) is placed within the bottom center guide (15).

  • Page 27: Straight Handle

    CONTINU WASHER Install bottom rollers, making sure that they are tangent to the running rail (1). Through the use of the nonconcentric washers, adjust rollers so that the sliding door panel is parallel to the running rail. GLASS HOLE WASHER STRAIGHT HANDLE Install straight handle (9) onto sliding door (6).
  • Page 28 PANNEAU FIXE DOOR SIDE GAS FIXED PANEL Install door side gasket (12) onto sliding door panel (6). 1/2” (12.57 mm) BOTTOM...

  • Page 29: Stoppers

    STOPPERS Adjust the position of the stoppers (4) so as to ensure a maximum opening and DOOR CLOSED closing range. 1/2” (6.35 mm) DOOR OPEN APPROX. 3” (76.2 mm) SILICONE Apply silicone between the bottom of the xed panel and the threshold of the base. Silicone application along the length of the threshold is also suggested.
  • Page 30 P-DR1WT-60 OWNER’S MANUAL TUB ENCLOSURES 2 PEOPLE REQUIRED IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE P011 SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS.
  • Page 31 TABLE OF CONTENTS PANNEAU FIXE FIXED PANEL PARTS LISTING ............3 PROVIDED HARDWARE ..........4 REQUIRED TOOLS AND MATERIALS ......... 4 GASKET INSTALLATION..........5 RUNNING RAIL............6 GLASS HOLDERS ............7 GLASS CLIPS ............7 FIXED PANEL PLACEMENT ........... 8 FIXED PANEL PLACEMENT (CONTINUED) ......
  • Page 32 PARTS LISTING FIXED PANEL ITEM PARTS RUNNING RAIL WALL BRACKET STOPPERS GLASS HOLDERS 2 PAIRS TWIN ROLLERS SLIDING DOOR PANEL FIXED PANEL HANDLE GASKET (DOOR) GASKET (FIXED PANEL) BOTTOM GLASS CLIP GASKET (GLASS CLIP) BOTTOM GUIDE GASKET (BOTTOM GUIDE) THRESHOLD DOOR PANEL SIDE GASKET DOOR PANEL BOTTOM GASKET...
  • Page 33 HARDWARE ITEM HARDWARE #12-3 SELF-THREADING SCREW #6-1 SELF-THREADING SCREW HEX KEY 5mm HEX KEY 6mm (7/32˝) TOOLS HACKSAW SCREWDRIVERS DRILL 1/4˝& 1/8˝ DRILL BITS SILICONE If the shower panels are to be assembled on ceramic tiles, use a 1/4˝ drill bit for ceramic tiles. PENCIL CUTTING PLIER TAPE MEASURE...

  • Page 34: Gasket Installation

    GASKET INSTALLATION Using the cardboard packaging box as platform, install bottom door gasket (17) onto door panel (6) using a block and a mallet. Notice the gasket orientation. INTERIOR SHOWER SIDE Place door panel (6) inside tub to simplify follow- ing installation procedures.

  • Page 35: Running Rail

    RUNNING RAIL Position the stoppers (3) on the running rail (1) as illustrated. Secure them temporarily in place. Position the wall brackets (2) on the running rail (1) as illustrated. Secure them temporarily in place.

  • Page 36: Glass Holders

    GLASS HOLDERS Fasten the running rail (1) to the xed panel (7) with the glass holders (4). Secure them temporarily in place. possible position in reference to the holes of the xed panel (7). WASHER GLASS HOLE GLASS CLIPS Insert bottom gaskets (12) in the bottom glass clips (11) and (13).

  • Page 37: Fixed Panel Placement

    FIXED PANEL The bottom guide (13) can hang o the threshold (B) as long as it can be well-fastened. INTERIOR SHOWER SIDE threshold of tub (B) as shown . Adjust the xed panel (7), by way of the running rail (1), so as to force the gasket (10) against the wall.

  • Page 38: Threshold

    CONTINUED (2) on the walls on both sides of shower as well as the placement of the bottom glass clips (11) (13). THRESHOLD Remove the xed panel assembly so as to allow placement of the threshold (15) onto the base. Ensure that a bead of silicone (S) is applied to the underside of the threshold before installing.

  • Page 39: Wall Brackets

    WALL BRACKETS Mark the screw locations on the walls on both sides of shower. Remove the running rail (1) l l i s l l until wall stud is reached with a drill bit intended for ceramic tiles. WALL STUD Fasten the wall brackets (2) with #12-3 screws (18).

  • Page 40: Sliding Door

    SLIDING DOOR Assemble the 2 top rollers (5) to the door panel (6) as illustrated. INTERIOR SHOWER SIDE Install sliding door (6) ensuring that rollers (5) are xed over the running rail (1). Ensure that sliding door (6) is placed within the bottom guide (13).

  • Page 41: Straight Handle

    CONTINUED Install bottom rollers, making sure that they are tangent to the running rail (1). Through the use of the nonconcentric washers, adjust rollers so that the sliding door panel is WASHER parallel to the running rail. GLASS HOLE WASHER STRAIGHT HANDLE Install straight handle (8) onto sliding door (6).

  • Page 42: Gasket Installation

    GAS KET INSTALLATION Thoroughly clean the edge of the sliding door (6), closest to the side where the handle is locat- ed. Apply the door gasket (9) to this edge of the sliding door. INTERIOR SHOWER SIDE Install door side gasket (16) onto slidind door panel (6).

  • Page 43: Stoppers

    STOPPERS DOOR CLOSED Adjust the position of the stoppers (3) so as to ensure a maximum opening and closing range. Ensure that the sliding door gasket (9) is forced against the wall. DOOR OPEN APPROX. 3” (76.2 mm) SILICONE Apply silicone between the bottom of the xed panel and the threshold of the base.

This manual is also suitable for:

P-dr1w-60

Table of Contents