Next 427044 Assembly Instructions

Primrose metal bed - double

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 adults is required to assemble this product.

PRODUCT INFORMATION

• Made in China.
• A mattress measuring 135cm x 190cm is intended for use with this bed.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly xings should always be tightened properly and periodically check all fixings and tighten if necessary.
427044 PRIMROSE METAL BED - DOUBLE
ASSEMBLY INSTRUCTIONS.
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 427044 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next 427044

  • Page 1 427044 PRIMROSE METAL BED - DOUBLE ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS STEP ONE 1. Insert 14 x slats 7 into the slat holes of the strap assembly 10. Ensure the curve of the slats are facing upwards. Page 2 of 5...
  • Page 3 STEP TWO 1. Insert 28 x plastic end caps 9 onto one edge of each wooden slat assembly. Ensure the curves of the slats are facing upwards and the pins of the caps facing downwards. STEP THREE 1. Attach 2 x side rails 3 to headboard 1 and footboard 2 with 8 x bolts (A), 8 x washers (E) and 8 x rubber washers (F), using allen key (I) to tighten.
  • Page 4 STEP FIVE 1. Attach 2 x adjustable feet (G) into support legs 6. 2. Attach 2 x support legs 6 to centre rail 4 using 2 x bolts (C) and 2 x washers (E), using allen key (I) to tighten. 3.
  • Page 5 STEP SEVEN Next Retail Ltd, Desford Road, Leicester, LE19 4AT Page 5 of 5...

Table of Contents