Zalip CDE570AM-U User Manual
  1. Manuals
  2. Brands
  3. Zalip Manuals
  4. Network Router
  5. CDE570AM-U
  6. User manual

Zalip CDE570AM-U User Manual

Wifi gigabit router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
ZALiP
CDE570AM-U
WiFi Gigabit Router
1

Advertisement

Table of Contents
loading

Related Manuals for Zalip CDE570AM-U

Summary of Contents for Zalip CDE570AM-U

  • Page 1 User Manual ZALiP CDE570AM-U WiFi Gigabit Router...

  • Page 2: Copyright

    Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS COPYRIGHT ......................... 2 FCC INTERFERENCE STATEMENT................... 2 CHAPTER 1 INTRODUCTION..................4 1.1 PACKAGE LIST ......................4 1.2 HARDWARE INSTALLATION .................. 5 CHAPTER 2 GETTING STARTED ................... 8 2.1 EASY SETUP BY WINDOWS UTILITY ..............8 2.2 EASY SETUP BY UTILITY FOR PRINTER SHARING .......... 12 2.3 EASY SETUP BY CONFIGURING WEB PAGES ..........

  • Page 4: Chapter 1 Introduction

    Chapter 1 . Introduction Congratulations on your purchase of this outstanding product: WiFi Broadband Router. This product is specifically designed for those who need to have the file sharing and P2P download services beyond his home and office. It provides a complete solution for Internet surfing and broadband sharing.

  • Page 5: Hardware Installation

    1.2 Hardware Installation 1.2.1 Hardware configuration Status LED Power LED USB LED WiFi LED USB Connector Reset Button WAN LED LAN LED 1－4 WPS/USB OFF Button ANTENNA Connector Power Switch Button Power Connector WAN Port LAN Port 1－4 ANTENNA Connector...
  • Page 6 1.2.2 LED indicators LED Status Description Status LED Green Power ON Green USB storage attached Green in flash Data access USB LED Press ‘USB off’ button till LED flashing, then Green in flash can remove USB storage when LED stop then stop flashing.
  • Page 7 Step 3. Plug your RJ-45 into the WAN port and connect with your xDSL modem. Step 4. Plug the power jack into it. Step 5. Power ON. Step 6. Prepare a USB Storage or Printer, and then plug into the USB port.

  • Page 8: Chapter 2 Getting Started

    Chapter 2 . Getting Started Please use windows EZ setup utility or Web UI wizard to enter the setup process. 2.1 Easy Setup by Windows Utility Step 1. Install the Easy Setup Utility from the provided CD then follow the steps to configure the device.
  • Page 9 Step 4. Click “Next” to continue. Step 5. One free DDNS account ‘ MAC address.ezguard.net’ for end user to access the NAS router remotely, you can rename an alias name to remember it easily. Once you type in a name, you can click ‘...
  • Page 10 Step 7. Enter SSID, Channel and Security options, and then click “Next” to continue. Step 8. Select Auto Detect WAN service. Step 9. Save the setting.
  • Page 11 Step 10. Congratulations! Setup is completed. Now you have already connected to Internet successfully.

  • Page 12: Easy Setup By Utility For Printer Sharing

    2.2 Utility for Printer Sharing Step 1. Install the Easy Setup Utility from the provided CD then follow the steps to configure the device. Step 2. Select Language then click “Next” to continue. Step 3. Please enter your information Then press next to continue. Step 4.
  • Page 13 Step 5. Click Install to begin the installation. Step 6. Processing. Step 7. Install Completed. Then you can click icon at your PC to run the program of printer sharing. Once you accomplish the utility of printer sharing, you can execute the program and follow the following steps to setup the printer and start to print.
  • Page 14 Step 8. When you run the utility, you can go to ‘tool‘->‘Configuration’ to change the language you wish. Step 8-1. Select Language Step 9. Once your printer is ready to plug in router, please make sure your PC already installed the printer driver in Windows.
  • Page 15 Step 9-1. If you want your printer to connect automatically next time, you can click on the icon of ‘Auto Connect Printer’. Step 10. We only allow one printer job to be printed at the same network, so once 2 print job to be executing, the system will send a warning message...
  • Page 16 Step 10. If 2 print job want to be printed immediately, the user of 1 print job can accept the user of 2 print job to control the printer, if the user of 1 print job free to release, then the user of 2 print job can control the printer.

  • Page 17: Easy Setup By Configuring Web

    2.3 Easy Setup by Configuring Web UI You can also browse UI of the web to configure the device. Browse to Activate the Setup Wizard Type in the IP Address (http://192.168.123.254) Type the default Username and password ‘admin’ in the System Password and then click ‘login’...
  • Page 18 Configure with the Setup Wizard Step 1 You can change the password of administrator here. Step 2 Select Time Zone. Step 3 You can select Auto detecting WAN type or setup WAN type manually.
  • Page 19 Step 4 The system will detect the WAN type if you choose to let the system detect automatically. Step 5 Type in Host name and ISP registered MAC address. (if no such information, you can go next) Step 5-1 Wireless setting. Step 5-2 Wireless authentication and encryption.
  • Page 20 Step 6 Check the information again. Step 7 System is applying the setting. Step 8 Click finish to complete it.

  • Page 21: Chapter 3 Making Configuration

    Chapter 3 . Making Configuration Whenever you want to configure your network or this device, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the device. The default IP Address is: 192.168.123.254. Enter the default username and password “admin”...

  • Page 22: Basic Setting

    3.1 Basic Setting 3.1.1 Network Setup There are two ways to configure the network, respectively LAN Setup and Internet setup. 3.1.1.1 LAN type 1. LAN IP Address: The local IP address of this device. The computer on your network must use the LAN IP address of this device as their Default Gateway. You can change it if necessary.
  • Page 23 A. Static IP Address 1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN connection is broken, the device will automatically activate the WWAN connection and keep you connected to internet with the alternative WWAN broadband service. Meanwhile, if the device detected that the Ethernet WAN connection is recovered, your broadband connection will be switched to use the Ethernet WAN service.
  • Page 24 B. Dynamic IP Address 1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN connection is broken, the device will automatically activate the WWAN connection and keep you connected to internet with the alternative WWAN broadband service. Meanwhile, if the device detected that the Ethernet WAN connection is recovered, your broadband connection will be switched to use the Ethernet WAN service.
  • Page 25 C. PPP over Ethernet 1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN connection is broken, the device will automatically activate the WWAN connection and keep you connected to internet with the alternative WWAN broadband service. Meanwhile, if the device detected that the Ethernet WAN connection is recovered, your broadband connection will be switched to use the Ethernet WAN service.
  • Page 26 feature. 5. PPPoE Service Name: Optional. Input the service name if your ISP requires it. Otherwise, leave it blank. 6. Assigned IP Address: It is required by some ISPs. (Optional) 7. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default MTU value is 0 (auto).
  • Page 27 3. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP assigned to you. 4. Gateway IP and Server IP Address/Name: The IP address of the PPTP server and designated Gateway provided by your ISP. 5.
  • Page 28 1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN connection is broken, the device will automatically activate the WWAN connection and keep you connected to internet with the alternative WWAN broadband service. Meanwhile, if the device detected that the Ethernet WAN connection is recovered, your broadband connection will be switched to use the Ethernet WAN service 2.
  • Page 29 3.1.2 DHCP Server 1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server function, the following settings will be effective. 2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer.
  • Page 30 Press “Clients List” and the list of DHCP clients will be shown consequently. Press “Fixed Mapping” and the DHCP Server will reserve the special IP for designated MAC address.
  • Page 31 3.1.3 Wireless Settings Wireless settings allow you to set the wireless configuration items. 1. Wireless Module: You can enable or disable wireless function. 2. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this device and other Access Points that have the same Network ID.
  • Page 32  Open Open system authentication simply consists of two communications. The first is an authentication request by the client that contains the station ID (typically the MAC address). This is followed by an authentication response from the AP/router containing a success or failure message. An example of when a failure may occur is if the client's MAC address is explicitly excluded in the AP/router configuration.
  • Page 33 Another encryption options for WPA-PSK-TKIP and WPA2-PSK-AES, the others are same as the WPA-PSK.  WPA/WPA2 Another encryption options for WPA-TKIP and WPA2-AES, the others are same the WPA. Press “WDS Setting” and It allows PC to get connected to wireless network within the area. 1.
  • Page 34 WPS:.You can enable this function by selecting “Enable”. WPS offers a safe and easy way to allow the wireless clients connected to your wireless network. AP PIN: You can press Generate New Pin to get an AP PIN. Config Mode: Select your config Mode from “Registrar” or “Enrollee”. Config Status: It shows the status of your configuration.
  • Page 35 3.1.4 Change Password You can change the System Password here. We strongly recommend you to change the system password for security reason. Click on “Save” to store your settings or click “Undo” to give up the changes.

  • Page 36: Forwarding Rules

    3.2. NAS Configuration 3.2.1. Disk Utility 1. Format This utility would format the certain partition. Please be noted! This action will clear all your data in this partition. You will not be able to recover it any more. 2. Check This utility could help you check the partition, find the lost files, try to fix some problems.
  • Page 37 3.2.2.2. FTP Service These settings are for FTP service. 1. FTP Port: The default port is 21, but sometimes you might want to hide your FTP service by changing it. We have the ability to receive the request on non-standard FTP port, but please be noted, some NAT router could not support non-standard FTP port, that means some of your clients might have to use passive mode to get file.
  • Page 38 3.2.3.1. User Configuration In this page, you can manage the user account. Key in the user name and password then press “Add” could let you add a new user. If you want to delete an account, select it and click “Delete” button. 3.2.4.
  • Page 39 3.3. Download Assistant 3.3.1. FTP If you want to download something from a FTP site regularly but you don’t want to spend time on remembering doing this, this FTP download assistant could help you. 1. Job Name: It’s for you to remember the job easily, and the device would use this name to info you when the job is done.
  • Page 40 3.3.2. HTTP 1. Job Name: It’s for you to remember the job easily, and the device would use this name to info you when the job is done. 2. URL: The URL for the file you want to download. You have to use this format: IP/path/file, you don’t have to add protocol part such like “http://”.
  • Page 41 3.3.3. BT (Bit Torrent) 3.3.3.1. Start BT download First, you have to get a seed file, which we called “torrent”. Then click the “Open” link on UI, it would pop up a sub menu to let you upload. Or, if your torrent file could be download from network, you could just enter a URL.
  • Page 42 3.3.3.2. BT download status After you upload the torrent, download job would be started immediately. The device could support 3 concurrent download jobs, other jobs would wait in job queue. If one of the three running job is done, the next new job would be started. At this page, you could see the download process and the bandwidth.
  • Page 43 3.3.4. Download Status At this page, you could check the download jobs of HTTP and FTP. 3.3.5. How to access data on the NAS? 3.3.5.1. Windows User 3.3.5.1.1. By network place Then start your “file manager”, type the IP with “\\” on the beginning, as follow picture shown.
  • Page 44 3.3.5.1.2. By Web HDD This Web HDD can allow you to enter HDD by web UI, and also can allow you to let ‘guest’ to enter the ‘public’ area only. 3.3.5.2. Unix User We do not provide NFS support, so the only way for UNIX to get files is FTP. Use your FTP client to connect the FTP server.
  • Page 45 Virtual Server 3.4.1. This product’s NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP.
  • Page 46 Special AP 3.4.2. Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications to work with this product. If the mechanism of Special Applications fails to make an application work, try setting your computer as the DMZ host instead.
  • Page 47 1. IP Address of DMZ Host DMZ (Demilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony and other special applications. 2.

  • Page 48: Security Setting

    3.4.3. Security Setting Packet Filters 3.4.3.1. Packet Filter includes both outbound filter and inbound filter. And they have same way to setting. It enables you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets. However, inbound filter applies on packets that destined to Virtual Servers or DMZ host only.
  • Page 49 You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the following:  Source IP address  Source port  Destination IP address  Destination port  Protocol: TCP or UDP or both. ...
  • Page 50 Domain Filter prevents users under this device from accessing specific URLs. 1. Domain Filter: Check if you want to enable Domain Filter. 2. Log DNS Query: Check if you want to log the action when someone accesses the specific URLs. 3.
  • Page 51 1. URL Blocking: Check if you want to enable URL Blocking. 2. URL: If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex".
  • Page 52 which wireless client can associate to the wireless LAN. If a client is denied to associate to the wireless LAN, it means the client can't send or receive any data via this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control table", to associate to the wireless LAN.

  • Page 53: Advanced Setting

    3.4.4. Advanced Setting System Log 3.4.4.1. This page supports two methods to export system logs to specific destination by means of syslog (UDP) and SMTP(TCP). The items you have to setup include: 1. IP Address for Syslog: Host IP of destination where syslog will be sent to. Check...
  • Page 54 Enable to enable this function. 2. Setting of Email alert: Check if you want to enable Email alert (send syslog via email). 3. SMTP Server: Port: Input the SMTP server IP and port, which are connected with ':'. If you do not specify port number, the default value is 25. For example, "mail.your_url.com"...
  • Page 55 name is concatenated with hostname(you specify) and a suffix(DDNS provider specifies). Username/E-mail: Input username or E-mail based on the DDNS provider you select. Password/Key: Input password or key based on the DDNS provider you select. Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes. 3.4.4.3.
  • Page 56 7. User Rule#: The QoS rule can work with Scheduling Rule number#. Please refer to the Section 3.4.1.7 Schedule Rule. Afterwards, Click on “Save” to store your settings or click “Undo” to give up the changes. SNMP 3.4.4.4. In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events.
  • Page 57 Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes. Routing 3.4.4.5. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow different subnets to communicate with each other.
  • Page 58 System Time 3.4.4.6. 1. Time Zone: Select a time zone where this device locates. 2. Auto-Synchronization: Check the “Enable” checkbox to enable this function. Besides, you can select a NTP time server to consult UTC time. 3. Sync with Time Server: Click on the button if you want to set Date and Time by NTP Protocol .
  • Page 59 1. Schedule: Check to enable the schedule rule settings. 2. Add New Rule: To create a schedule rule, click the “New Add” button. You can edit the Name of Rule, Policy, and set the schedule time (Week day, Start Time, and End Time).
  • Page 60 3.4.5. Tool Box System Info 3.4.5.1. You can view the System Information and System log, and download/clear the System log, in this page.
  • Page 61 Firmware Upgrade 3.4.5.2. You can upgrade firmware by clicking “Upgrade” button. Backup Setting 3.4.5.3. You can backup your settings by clicking the “Backup Setting” function item and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved.
  • Page 62 Reset to Default 3.4.5.4. You can also reset this device to factory default settings by clicking the Reset to default function item. Reboot 3.4.5.5. You can also reboot this device by clicking the Reboot function item. Miscellaneous 3.4.5.6.
  • Page 63 MAC Address for Wake-on-LAN: It enables you to power up a networked device remotely. If you would like to trigger this function, you have to know the MAC address of this device. For instance if the MAC address is 00-11-22-33-44-55, enter it into the blank of MAC Address for Wake-on-LAN. Afterwards.

  • Page 64: Chapter 4 Troubleshooting

    4 . Troubleshooting This Chapter provides solutions to problems for the installation and operation of the WiFi Broadband Router. You can refer to the following if you are having problems. 1 Why can’t I configure the router even the cable is plugged and the LED is lit? Note: It is recommended that you use an...
  • Page 65 Right-click on Wireless Card bus Adapter or your specific network adapter. Select Properties to ensure that all drivers are installed properly. Look under Device Status to see if the device is working properly. Click “OK”. 2 What can I do if my Ethernet connection does not work properly? Make sure the RJ45 cable connects with the router.
  • Page 66 ii. Select View Available Wireless Networks in Wireless Configure. Ensure you have selected the correct available network. iii. Reset the WiFi Broadband Router to default setting Why does my wireless connection keep dropping? Antenna Orientation. i. Try different antenna orientations for the WiFi Broadband Router. ii.

  • Page 67: Appendix A. Spec Summary Table

    Appendix A. Spec Summary Table Device Interface CDE570AM~U Ethernet WAN RJ-45 port, 10/100/1000Mbps, auto-MDI/MDIX Ethernet LAN RJ-45 port, 10/100/1000Mbps, auto-MDI/MDIX USB 2.0 for file sharing USB Sharing ● USB 2.0 for Printer Sharing Antenna 2 dBi detachable antenna WPS / USB For WPS connection and USB storage remove OFF Button button...
  • Page 68 Environment & Certification Package Content CDE570AM-U, Power adapter, Quick ● Installation Guide, CD Package Information Device dimension (mm) 185x112x25 Package dimension (246x210x62mm) ● SP/MP/ZP Package dimension (214x146x69mm) ○ Package dimension (290x234x100mm) ○ Temp.: 0~40oC, Humidity 10%~90% Operation Temp. ● non-condensing Temp.: -10~70oC, Humidity: 0~95%...

  • Page 69: Appendix B. Licensing Information

    Appendix B. Licensing information This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please refer to the GNU General Public License below to check the detailed terms of this license. The following parts of this product are subject to the GNU GPL, and those software packages are copyright by their respective authors.
  • Page 70 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 71 GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program"...
  • Page 72 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium...
  • Page 73 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
  • Page 74 低功率電波輻射性電機管理辦法 第十二條 型式認證合格之低功率射頻電機，非經許可，公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性 及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通 信；經發現有干擾現象時，應立即停用，並改善至無干擾時 方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波 輻射性電機設備之干擾。...

Table of Contents