Related Manuals for AGC MIROX MNGE
Summary of Contents for AGC MIROX MNGE
- Page 1 MIROX MNGE PROCESSING GUIDE VERSION 1.0 – APRIL 2019 Please check http://agc-tas.com/ regularly for updates.
- Page 2 5. CUTTING ..........................5 6. EDGE PROCESSING & DRILLING ..................5 7. LAMINATING ..........................6 8. SANDBLASTING ........................6 9. PACKING THE PROCESSED PRODUCT ................6 10. CLEANING ..........................6 AGC // Mirox MNGE – Processing Guide – Version 1.0 - April 2019...
- Page 3 Away from sources of heat and corrosive materials or agents such as organic solvent vapours, chemicals, acids, or fuel; • Never outside Storage time depends on the aforementioned conditions. AGC // Mirox MNGE – Processing Guide – Version 1.0 - April 2019...
- Page 4 ▪ Static electricity may build up while unloading safety back products after transport. ▪ You can discharge the build-up of static electricity by using insulated wire to ground personnel. AGC // Mirox MNGE – Processing Guide – Version 1.0 - April 2019...
- Page 5 100mm wide and at least 1m long. It should be possible to break the cut strips by hand. ▪ AGC provides this information for advisory purpose. The user/customer is solely responsible for using this advice. 6. EDGE PROCESSING & DRILLING...
- Page 6 ▪ Use spacers when stacking processed products. 7. LAMINATING Mirox MNGE are silvered glass products for use in interior applications only. They cannot be laminated or used in double glazing units, even on the inner side of the glazing unit. The plasticizers in the PVB would have a negative influence on the paint coating.
Need help?
Do you have a question about the MIROX MNGE and is the answer not in the manual?
Questions and answers