Page 1
INSTRUCTIONS SET ELECTRIC EXPANDER FOR PEX-A PIPES (Expansion ring system) Self-rotatory expanding head...
Page 2
DESCRIPCIÓN WARNINGS 1. Expander cone • Remove the battery pack 2. Trigger before starting any work on the machine. 3. Lock of trigger • When the battery is charging, 4. 2 batteries: 12V 5,0Ah 60Wh keep it away from the water 5.
Page 3
Then put the ring back on the end of the pipe sticking out a bit (max. 1 mm). PEX-a ring with stop edge or EVO-PLUS ring Place the ring on the end of the pipe until the pipe reaches the stop edge of the ring.
Page 4
Carry out the tightness test according to ded, is 20 bar (2.0 MPa). At room temperature, after test procedure A of the standard about 6 hours, the joint will be as strong as the tube. UNE-CEN / TR 12108 IN: 2015 www.ac-fix.com...